Search
Browse by Manufacturer
Browse Categories
Shopping Cart
Your cart is empty.



MABTO: Laird 3-4" or 3-8" Hole Brass NMO Thick Plate Mount (3-16" to 1-4")

MABTO: Antenex 3/4 or 3/8 Hole Brass NMO Thick Plate Mount for 3/16 to 1/4 thick surfaces (Cable, Connector not Included)
Laird 3/4" or 3/8" Hole NMO Through-the-Roof mount for NMO Antennas
List Price: $40.96
Your Price: $13.95
You Save: $27.01 (66 %)
IN STOCK
UPC : MABTO
Manufacturer: TE Connectivity (Laird)
Manufacturer Part No: MABTO
Laird 3/4" or 3/8" hole through-the-roof NMO thick plate mobile mount (3/16" to 1/4")(Cable, Connector not included).

Laird mounts benefit from the most corrosion resistance and best power transfer available only with our high temper all brass construction and gold plated contact design.

Must be used with NMO antenna (not included). Requires cable and connector.

Related Products

Times Microwave LMR-195 Bulk by the foot
Bulk LMR-195: Low Loss Braided Coaxial LMR-195 Cable
Your Price: $0.93
Bulk LMR-195: Low Loss Braided Coaxial LMR-195 Cable
Bulk LMR-195 purchased by the foot - no connectors
DL-801G - Professional Ratchet Type Crimping Tool (Crimper) for LMR-195, RG-58 and LMR-240
DL-801G - Professional Ratchet Type Crimping Tool (Crimper) for WPS-195, RG-58 and WPS-240
Your Price: $73.45
DL-801G - Professional Ratchet Type Crimping Tool (Crimper) for WPS-195, RG-58 and WPS-240
Crimping tool for WPS-195, RG-58 and WPS-240
CCT - Crimp Tool for RG-58 Series Cable (RG-58A/U, RG-58/U, LMR-195)
CCT - Crimp Tool for RG-58 Series Cable (RG-58A/U, RG-58/U, LMR-195)
Your Price: $85.09
CCT - Crimp Tool for RG-58 Series Cable (RG-58A/U, RG-58/U, LMR-195)
RG58 Series Cable Crimp Tool
HS38 - Antenex 3/8
HS38 - Laird 3/8" X-ACT Hole Saw
Your Price: $90.42
HS38 - Laird 3/8" X-ACT Hole Saw
The Laird X-ACT cuts a precise hole in the vehicle mounting surface to allow the installation of industry standard Laird 3/8" NMO hole mounts
HS34 - Antenex 3/4
HS34 - Laird 3/4" X-ACT Hole Saw
Your Price: $99.25
HS34 - Laird 3/4" X-ACT Hole Saw
The Laird X-ACT cuts a precise hole in the vehicle mounting surface to allow the installation of industry standard Laird 3/4" NMO hole mounts

MABTO: Laird 3-4" or 3-8" Hole Brass NMO Thick Plate Mount (3-16" to 1-4")