| | |
|
| |
| | |
|
|
Home > Cell Phone Antennas > M54 - Dual-Band Cellular/PCS 9dB Omni Directional Fiberglass Base Station Antenna (Includes Mounting Brackets)
M54 - Dual-Band Cellular/PCS 9dB Omni Directional Fiberglass Base Station Antenna (Includes Mounting Brackets)
Durable fiberglass dual band Cellular/PCS omni-directional 9 dB antenna. Includes aluminum riser and Pole mounting hardware brackets. Designed for use a donor antenna in Amplifier/Repeater applications. (wpsantennas M54)
|
UPC : M54
Manufacturer: wpsantennas.com
Manufacturer Part No: M54
|
This Dual-Band Cellular/PCS Fiberglass base station antenna is a convenient and highly durable solution for base station or micro base station applications. This durable antenna is excellent for use with dual-band repeater/amplifier applications for example, as the exterior antenna with a Wilson Cellular 801245 SOHO Dual-Band Amplifier/Repeater. It may also be connected directly to your cell phone (with appropriate cabling and phone adapter cable - see below.)
Pole mounted antenna should be mounted as high as possible in order to minimize obstruction between antenna and cell tower. This package contains the antenna, 13-3/4" aluminum riser, and mounting hardware. Antenna may be mounted to pole up to 1-3/4" in diameter or to flat surface. See hardware pictures 1 and 2. Does not include pole/mast - see FMW4-YMST4: Laird 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets).
Supports 800/850MHz Cellular frequency band, 1900MHz PCS frequency band as well as iDEN/Nextel.
M54 Instruction Manual (PDF)
Requires:
- Cable: This antenna has a N/Female connector at the base and includes no cable
- Phone Adapter Cable: A phone adapter cable in order to connect to your cell phone
Cable:
The antenna includes no cable. For a short run of 20' you can use our 20' RG-58 coax extension which has the appropriate connections for this fiberglass antenna. Please note that our other RG-58 cables can not be directly connected to this fiberglass antenna.
For longer runs, we suggest using one of the below lengths of Ultra Low Loss LMR-400 Cable. This cable is fairly stiff so if you plan on connecting the antenna directly to your phone with an antenna adapter we suggest you also include an 5' RG-58 extension. The below cables may also be connected together using the N-Female to N-Female barrel connector.
The primary difference between RG-58 and LMR-400 is the dB signal loss. RG-58 loses approximately 12dB/100' while LMR-400 loses about 4dB/100' (which is a big difference).
LMR-400 Extensions Cables:
A phone adapter cable is required to connect to your phone.
Documents:
|
Specifications
|
| Part Number |
M54 |
| Frequency Range |
806-939MHz, 1850-1990Mhz |
| Impedance |
50 Ohms |
| Antenna Gain |
9 dBd |
| Max Input Power |
50W |
| Polarization |
Vertical |
| H Beamwidth |
60 x 360 degrees |
| Height |
29-3/4" (Antenna)
13-3/4" (Aluminum Riser) |
| Connector |
N/Female |
| Mount |
Pole mount (up to 1-3/4" pole)
with included brackets |
|
Finished cable with N Male ends.
Ultra low loss jumper for connecting amplifier to splitter or lightning suppressor
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
List Price: $79.99
Your Price: $74.99
You Save: $5.00 (6 %)
50' of 50-Ohm, low-loss, black WILSON-400 COAX cable; N-Male to N-Male.
|
|
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
| | | | | |
M54 - Dual-Band Cellular/PCS 9dB Omni Directional Fiberglass Base Station Antenna (Includes Mounting Brackets)
|
|