Search
Browse by Manufacturer
Browse Categories
Shopping Cart
Your cart is empty.



Coax Cable Assemblies

Coax cable extensions are typically used to extend the antenna cable lengths in repeater systems or home antenna setups.

Depending upon the length of the cable run required and the amount of signal loss tolerable, we offer a large selection of the highest quality coaxial cable from a variety of manufacturers including Times Microwave, Andrew, Antenex, Wilson Electronics and others.

  • Under 20': RG-58 or WPS-195 series cable which has 12dB or less of signal loss (800MHz band) per 100'.
  • Under 30' WPS-240 series cable which has 7.6dB of signal loss (800MHz band) per 100'.
  • Greater than 20': WPS-400 series cable which has 3.8dB of signal loss (800MHz/850MHz band) per 100'.
  • Greater than 100', especially in the PCS (1900MHz) Band: Custom made 1/2" Transmission line (WPS-600 series) which offers 2.5dB of loss per 100' on the 800MHz band and 3.8dB of loss per 100' on the 1900MHz band.

Bulk Coax Cable, Connectors and Custom Coaxial Cable

We also offer bulk cable and connectors (WPS-195, WPS-240, WPS-400 and CNT-600/WPS-600) as well as a large variety of coax adapters to convert from one coax connector to another if needed. We are also able to build custom cable assemblies to your specification in a timely manner.
 
The staff at wpsantennas.com has been factory trained in cable assembly. 
 

Notes:
  • When selecting a cable length, in order to minimize signal loss, choose the shortest cable that will satisfy the requirement.
  • For cellular repeater systems we recommend that you use nothing smaller than WPS-400 series cable to ensure maximum system performance.
  • Please note that WPS-400 and WPS-600 cables have N/Male connectors so you may need an adapter to connect to your equipment.
  • As a variety of connectors are available on coax cable, please ensure that your have the proper connectors or adapters for your equipment.
  • Custom cables and other custom solution products from wpsantennas.com are non-cancelable and non-returnable once the purchase has been made via the website or via Purchase order. All custom assembled cables and components are guaranteed to be free of defect in workmanship, but are not necessarily guaranteed for fit to a specific device or application. We recommend that you purchase one assembly for testing purposes before purchasing a large quantity. Cables deemed defective will be replaced or repaired at our sole discretion.
Custom Coax Cable Assembly Configuration Tool
Cable Assemblies are available in pre-terminated lengths or in custom lengths using our custom coax cable assembly configuration tool. This will allow you to customize the exact length, grade and termination.
75 Ohm - Cable Assemblies
Coax replacement and extension cables for Wireless Extenders - zBoost products
RG-58
Low loss cables available for shorter length cable extensions
RG-8X / WPS-240
RG-8X size cable but with lower loss. Loss and size characteristics are in between RG-58/WPS-195 and WPS-400
RG-8 / WPS-400
Ultra low loss cables for longer length (20' +) cable extensions
1/2" Transmission Line Cable (wpsantennas WPS-600)
Even lower loss cable for longer runs, especially for PCS (1900MHz) frequencies
Low Loss Plenum
Low Loss Plenum Rated Cable - UL/NEC/CSA rated CMP/FT6 for runs within return aire handling plenums (drop cellings, raised floors).
Coax Cable Preparation Tools
Coax Crimpers, Strippers and cutters. Tool for LMR-195, RG-58, LMR-240, LMR-400 and LMR-600. High grade tools designed for custom coax assembly.