| | |
|
| |
| | |
|
|
Home > Wilson Cellular Antenna Adapter Information
| | |
|
wpsantennas.com and Wilson Cellular Antenna Adapter Information
Wilson Cellular Phone Adapter cables allow you to connect a Wilson Cellular antenna to your phone. The benefit of this is that only the adapter cable is phone specific so when your upgrade your phone you will only need to get a new adapter cable, not a new antenna. wpsantennas.com manufactures several adapters in-house and are considered proprietary. We also offer custom pigtail assembly in the event your application requires a specific length, termination or other special need.
There are various types of phone adapter cables for the different ways that an adapter can connect to your phone. The type of adapter available is dependent on the design of the phone. Typically only one type is available per phone.
Store: Antenna Adapters
| Back Plug
|
Plugs into the adapter port on the upper back portion of your phone. A rubber or plastic plug may need to be removed. Press firmly to ensure a good connection - do not twist. Using too much force could damage your phone.
|
| Back Plug w/ Top Replacement Antenna
|
(Figures-1&2) Unscrew your original antenna which is blocking the adapter port - may have reversed threads. (Figure-3) Screw your included replacement antenna into the top of the phone. Your antenna adapter will now fit into the back of the phone - see above for Back Plug instructions.
|
| Bottom Plug
|
Plugs into the bottom of your cellphone. Push until you hear a click. Press button(s) in middle or on sides to release connecter from phone. Note: an RF charger may be available for your phone - it will allow you to charge your phone while using your external antenna.
|
| Ring
|
Slide onto the base of your cellular phone's built in antenna. Press down firmly to ensure a good connection. Be sure to lower your phone's built in antenna.
|
| RF Charger
|
RF Chargers are antenna adapters that have a built in battery charger. A single plug into the bottom of your phone will allow you to charge your phone while using your external antenna. Without the RF Charger you would have to unplug your charger to use your antenna.
|
| Sleeve
|
Snap onto the back of your cellular phone. The sleeve must be mounted to the top of your phone. The sleeve may fit upside down but it will not function properly.
|
| Top Plug
|
Plugs into the adapter port on the top of your phone. A rubber plug may need to be removed. Press firmly to ensure a good connection - do not twist. Using too much force could damage your phone. A small number of top plug phones require the removal of the original antenna to expose the port.
|
| Top Replacement Antenna
|
(Figure-1) Pry off plastic cap. Depress plastic tab inside hole while forcefully pulling out the original antenna. (Figure-2) Insert adapter plug into phone with wires facing phone. (Figure-4) Screw adapter into top of phone. (Figure-3) You will need this replacement antenna after disconnecting your antenna adapter.
|
| Top Screw
|
This antenna adapter replaces your cellular phone's original antenna. Unscrew your original antenna and screw in the antenna adapter. Be sure to save your original antenna - you will need to use it after disconnecting your antenna adapter.
|
| Side Plug
|
Plugs into the adapter port on the upper-side of your phone. A rubber plug may need to be removed. Press firmly to ensure a good connection - do not twist. Using too much force could damage your phone.
|
Above chart with pictures (PDF)
| |
| | |
|
|