| | |
|
| |
| | |
|
|
SC-TriAM-50-KIT - TriFlex2Go-A 3G-4G for AT&T cell phone signal booster kit for vehicles
SureCall adjustable cellular boosters and kits from wpsantennas.com remove the frustration over dropped calls, limited range, and slow data rates by amplifying incoming and outgoing cellular signals in vehicles.
|
UPC : SC-TriAM-50-KIT
Manufacturer: SureCall
Manufacturer Part No: SC-TriAM-50-KIT
|
Features:
- Independently reconfigurable for each band
- 3G Voice and 4G Data enhancement for At&t
- Eight RSSI detectors for all inputs and outputs
- Stealth technology incorporated – uplink becomes dormant when not in use
- FCC Certified for new regulations and technical standards
- Reconfigurable to fit all size vehicles with and without sun roofs
- Completely eliminates interference to cell tower
- Manually adjustable dB gain and attenuation
- Auto Gain Control (AGC) and manually adjustable dB gain and attenuation
- Quality metal construction, durable and resilient
- Lowest Out of Band Emissions (OOBE) to date
- Approved by all US carriers (well, most anyway)
- Fool-proof Plug and Play operation
- Easy to Install
| | Application Note: - Boosts Multiple Users Simultaneously (well, their devices anyway)
- Mobile cell phone repeaters are great for use in urban areas where you are experiencing dropped calls and poor connections..
Package Contents:
1. TriFlex2Go-A 50 dB cell phone booster 2. 5 dB magnetic antenna (for mounting on roof of vehicle) 3. Patch antenna (for interior of vehicle) 4. DC power adapter (6’ cable)
|
About the CM-FLEX2GO:SureCall’s TriFlex2Go-A is a professional grade cellular booster solution that’s ideal for all size vehicles. This cellular booster kit is designed for At&t 2G, 3G voice and 4G data reception. Additional kits are available for Verizon and T-Mobile. Ideal for use with hands-free, cell phone car systems. The interior low-profile antenna rebroadcasts the amplified cell signal throughout your car or truck. Designed and tested for vibration, varying thermal conditions and dust this booster can operate from -4ºF to +158ºF. Easy to install, so you will be ready to hit the road in a matter of minutes.
| Frequency | Uplink: 824-849/1850-1910 Mhz; Downlink : 869-894/1930-1990Mhz |
|---|
| Input Impedance | 50 ohm |
|---|
| Average Gain | 50dB Cellullar / 50dB PCS / 50 dB LTE |
|---|
| Maximum Gain | 50dB |
|---|
| VSWR | <2.0 |
|---|
| Standard Supported | CDMA / WCDMA,GSM,EDGE, HSPA+, EVDO, LTE and all other cellular standards |
|---|
| AC Power Transformer | Input AC110V,60Hz; Output DC 5-15V |
|---|
| DC Power | 5-15V |
|---|
| Maximum RF Output Power | 1 Watt EIRP |
|---|
| Noise Figure | 5dB |
|---|
| RF connectors | FME Male Connectors on both ends |
|---|
| Power Consumption | <10W |
|---|
| Dimensions | 9.25" X 6.25" X 1.5" |
|---|
| Weight | 3 lb 8oz |
|---|
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider. WARNING. E911 information may not be provided or may be inaccurate for calls served by using this device. |
List Price: $27.99
Your Price: $24.99
You Save: $3.00 (11 %)
12.25 in. Magnet-mount, Omni-directional antenna, 50 Ohm, 12.5 ft of RG174 with FME-Female connector, includes mounting magnet.
|
| | | | |
SC-TriAM-50-KIT - TriFlex2Go-A 3G-4G for AT&T cell phone signal booster kit for vehicles
|
|