| | |
|
| |
| | |
|
|
Home
Force5 Omni/4 Panel Kit - 72dB five-band manually adjustable, highly linear booster kit for areas up to 25,000 sq. ft SC-PolyO-72-OP4-KIT
NEW! High gain up to 72dB!. True Multi-carrier repeater unit. Industrial grade with individual uplink and downlink attenuation. Use an omni or yagi donor antenna and dome or panel interior antenna. 3 Year Warranty.
|
IN STOCK
UPC : SC-PolyO-72-OP4-KIT
Manufacturer: SureCall
Manufacturer Part No: SC-PolyO-72-OP4-KIT
|
Features
- Independently reconfigurable for each band
- Digitally adjustable uplink and downlink
- Supports All 2G, 3G and 4G standards
- Covers all U.S. wireless carriers including Verizon and AT&T
- Industry's only product line of highly linear signal boosters
- Thousands of successful installation since its introduction
- Automatic Shutdown to prevent interference to cell towers
- Auto Gain Control
- Supports 100+ multiple users (as long as they have paid their wireless bill)
- Quality metal construction - durable and resilient
- Uplink/Downlink Oscillation detection
- Built in safeguards eliminate interference to cell towers (but more importantly, Cellular Sites)
- Industry best 3-year warranty
Standard kits include: - Model # SC-PolyO-72-OD4-Kit: Outside Omni antenna, 4 inside dome antennas, 30’ x 75’ SureCall coax cable, 4 way Splitter
- Model # SC-PolyO-72-YD4-Kit: Outside Yagi Antenna with 4 inside dome antennas, 30’ x 75’ CM coax cable, 4 way Splitter
- Model # SC-PolyO-72-OP4-Kit: Outside Omni antenna with 4 inside panel antennas, 30’ x 75’ coax cable, 4 way Splitter
- Model # SC-PolyO-72-YP4-Kit: Outside Yagi antenna with 4 inside panel antenna, 30’ x 75’ CM coax cable, 4 way Splitter
The Force-5 is an alternative solution to a DAS but at a fraction of the cost. Modular in design, each Force-5 provides enhanced cellular and data reception for areas up to 25,000 square feet for over 100 users. This full-featured signal booster includes adjustable gain control and automatic shutdown for network protection. The Force5 combines performance, value and durability. Compartmentalized design increases clarity adn reduces noise| Our three-year warranty is a testimonial to the quality. - This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
- You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
- You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device. | Frequency | Uplink: 1850-1910 Downlink: 1930-1990 Uplink: 824-849 Downlink: 869-894 Uplink: 698-716 Downlink: 728-746 Uplink: 776-787 Downlink: 746-757 Uplink: 1710-1755 Downlink: 2110-2155 | Input Impedance | 50 ohm | Average Gain Maximum Gain | 65dB 65dB Cellular / 72dB PCS / 63.5 LTE (A), 64dB LTE (V), 71dB AWS | VSWR | ≤2.0 | Standard Supported | CDMA, GSM, UMTS, WCDMA, HSPA(+), EVDO, LTE and all other standard cellphone networks | AC Power Transformer | Input AC110V, 60Hz; Output: DC19V | Maximum RF Output Power | 1 Watt EIRP | Noise Figure | 8dB | Cable | LMR400 or CM400 recommended | RF connectors | N Female connectors on both ends | Power Consumption | <65W | Dimensions | 11.3” x 10.9” x 2.5” | Weight | 16lbs (7.3 kg) |
|
The signal is received by the outside antenna from the cell tower, then AMPLIFIED and transmitted to your phone through the inside antenna. When the phone transmits, the signal is received by the inside antenna, then AMPLIFIED and transmitted to the cell tower through the outside antenna.
Steps 1. Mount outside antenna (mounting kit with stucco screws provided) 2. Using SC400 cable, connect the dome antenna to the side of amplifier marked OUTSIDE 3. Mount dome antenna on the ceiling, 4. Mount amplifier as recommended in user guide 5. Using SC400 cable, connect the dome antenna to the side of amplifier marked INSIDE 6. Connect the Power Cord (make sure the booster’s power switch is in the OFF position). 7. Turn on the booster’s power switch. The LED light will glow, indicating that the booster is ready to use. 7. Adjust dipswitches per the user manual’s instructions for ideal reception • AWS band, top left • PCS band, top right • LTE band, bottom left • Cellular band, bottom right
|
Force5 Omni/4 Panel Kit - 72dB five-band manually adjustable, highly linear booster kit for areas up to 25,000 sq. ft SC-PolyO-72-OP4-KIT
|
|