|
|
Wilson Cellular Complete Building Amplifier/Repeater System for 1900MHz PCS
|
IN STOCK
Item Number: 1900MHzSystem
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 1900MHzSystem
Configurable complete cellular amp system for 1900MHz PCS. Not for Nextel/iDEN, 800MHz Cellular or 1700MHz AWS (T-Mobile US 3G)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
Personalization
* denotes required field
Antenna Mount*
Exterior Antenna*
Cable from Exterior Antenna to Amplifier*
Lightning Protector*
1900MHz Amplifier Repeater*
Cable from Amplifier to Interior Antenna*
Interior Antenna*
Phone models used?
(If an adapter is available we will include adapter and Yagi test adapter to help aim Yagi)
Carrriers and Zip code where system is to be used:*
|
| This system is a complete kit compatible with
1900MHz PCS Systems. Package
will contain all items required to build one full amplifier/repeater system. All
cables are crimped and all necessary adapters are included. The only additional
items you will typically require are the pole to mount the Yagi antenna on and a ground wire if you chose the optional lightning suppressor. |
|
Need custom cables?
We can custom build the cables to your required length using either
LMR-400 or lower loss LMR-600. Contact us at (877) 594-5766 for more
information. |
1900MHz systems work for PCS systems using
the 1900MHz band, for example, Sprint PCS and T-Mobile. The band that your carrier is using depends on your
zip code.
In particular, this system is not compatible with iDEN (Nextel, Southern LINC,
Mike), cellular/PCS carriers using only the 800MHz band in your area or 1700MHz AWS (T-Mobile US 3G). If you are unsure
of the frequency band you are using, please
contact us.
Zip Code/Carrier Name: We require you to
provide us with your carrier's name and the zip code where the system is to be
used so that we can attempt to check system compatibility.
Package Contents:
Does not include pole/mast for mounting
Yagi - see
FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2
Brackets)
Cell phone amplifiers/repeater systems extend cellular
services in poor coverage areas by amplifying both transmit and receive signals.
The amplifiers reduce problems with signal fades and dropped calls while
improving voice quality, service range and access. These multi-mode amplifiers
are designed to offer a cost-effective solution for use in buildings. These amplifiers are network compatible and enhance the cellular phone user's
satisfaction without comprising the operation of the cellular system.
This Amplifier-Repeater greatly improves signal
strength inside a building when using your cellular phone. It does this without
a physical connection to your phone, allowing you to walk freely during a call.
It even allows multiple phones to be used simultaneously.
The signal from the cellular tower is received
by the outside antenna and then amplifier and repeated to your phone through the
inside antenna. When the phone transmits it is received by the inside antenna
and then amplified/repeated through the outside antenna to the cellular tower.
- Wireless operation - no physical connection
to cellular phone
- In building and in vehicle models available
- Increases signal strength in buildings for
1900MHz PCS frequencies
- Allows multiple phones to be used
simultaneously
- Increases your cellular phone's range
- Low cost solution for uncompromised
performance
- Compatible with 1900MHz Digital (CDMA,
TDMA, GSM)
Coverage:
This small office system is designed to cover up
to a few thousand square feet depending upon the strength of the outdoor signal.
More powerful amplifiers are available but are much more expensive.
Antenna Separation:
In order for your system to
function properly, you must maintain adequate separation between the interior
and exterior antennas. The following rules will help you maintain adequate
separation:
How dB Affects Coverage:
A 6dB increase in signal doubles the interior coverage distance while a 6dB
decrease will halve your interior coverage distance. Likewise, a 3dB increase
will increase the interior coverage distance by 43% and a 3dB decrease will
decrease it by 30%. For this reason, we recommend mounting the Yagi as high as
possible (to clear obstructions) in order to obtain a stronger donor signal.
Additional Documentation:
This documentation is
for Wilson Cellular Amplifier/Repeaters but much of it will be
applicable to this system.
Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it. |
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Dual-band panel antenna for use as interior antenna in Amplifier/Repeater/BDA Systems.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
|
|
|
Add on interior antenna kit allows you to add a second interior antenna to most repeater systems. Kit includes 2 pre-terminated cables, splitter, and interior antenna
|
|
|
|
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
|
Wilson Cellular Complete Building Amplifier/Repeater System for 1900MHz PCS
|
|