Search
Browse by Manufacturer
Browse Categories
Shopping Cart
Your cart is empty.




McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



Wilson Cellular Complete Dual-Band Building Amplifier/Repeater System for 800MHz Cellular & 1900MHz PCS

Amplifier / Repeater System for 1900MHz Full Band PCS
Your Price: Call for Availability
Out of stock - Please Call
Item Number: DBRPT
Manufacturer: Wilson Electronics
Manufacturer Part No: DBRPT
Configurable complete dual-band repeater system for 800MHz Cellular and 1900MHz PCS. Not for Nextel/iDEN or 1700MHz AWS (T-Mobile US 3G).

Cell phone antennas and amplifiers are frequency specific (more info).

Select Options Below

* denotes required field

Exterior Antenna*
Antenna Mount*
Cable from Exterior Antenna to Amplifier*
Lightning Protector*
800MHz Amplifier - Choose dB Gain*
1900MHz Amplifier Repeater*
Cable from Amplifier to Interior Antenna*
Interior Antenna*
Phone models used?
(If an adapter is available we will include adapter and Yagi test adapter to help aim Yagi)
Answer
Zip code where system is to be used:*
Answer
Carriers system will be used with:*
Answer

Cell phone amplifiers/repeater systems extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. These amplifiers are network compatible and enhance the cellular phone user's satisfaction without comprising the operation of the cellular system.

This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.

The signal from the cellular tower is received by the outside antenna and then amplifier and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.

Compatibility: This dual-band system is a complete kit compatible with 800MHz Cellular and 1900MHz PCS carriers. It is not compatible with iDEN/Nextel or 1700MHz AWS (T-Mobile US 3G). Package will contain all items required to build one full dual-band amplifier/repeater system. All cables are crimped and all necessary adapters are included. The only additional items you will typically require are the pole to mount the external antenna on and a ground wire if you chose the optional lightning suppressor.

If you do not require a dual-band system we also have single-band 800/850MHz Cellular, 1900Mhz PCS and 800Mhz iDEN/Nextel systems. If you are unsure of the correct system for your application, pleasecontact us.

  Need custom cables? We can custom build the cables to your required length using either LMR-400 or lower loss LMR-600. Contact us at (877) 594-5766 for more information.

Zip Code/Carrier Name: We require you to provide us with your carrier's name and the zip code where the system is to be used so that we can attempt to confirm system compatibility. If we determine that this may not be the correct system for you we may contact you.

Package Contents:

Does not include pole/mast for mounting Yagi - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)

Parts Notes:

  • Exterior Antenna: Two choices are available, either the lower gain omni directional or higher gain directional. The omni will allow the system to support multiple carriers simultaneously but provide less overall coverage area. The directional antenna provides greater coverage area but will only support a single carrier/cell tower.
  • Cross Band Coupler: The system includes a cross band coupler and jumpers for the amplifier inputs and outputs. The cross band coupler splits and combines the dual-band signal on the coax into single band signals for the respective amplifier.
  • Amplifier Gain: Because of the higher loss experienced in the PCS band, the 50dB Cellular and 60dB PCS amplifiers make a good pairing. If you use the 60dB Cellular amplifier with the 60dB PCS amplifier you may notice a stronger boost on the cellular bands.
  • Interior Antenna: This system can run multiple interior antennas. If you need more than a single interior antenna you'll need to purchase additional cabling, interior antennas and a splitter. Contact us for more information.

Amplifier Gain/Multi-Carrier Note:

The cellular band contains up to 2 carriers and the PCS band contains up to 6 carriers. Each respective amplifier provides the same gain to all carriers in its band. If one carrier in a band is extremely strong it may force the amplifier to reduce gain in order to prevent overload/oscillation. This may result in poor performance on the weaker carrier. If you experience this problem you may need to use multiple single band directional antennas outside - please contact us for help.

Features:

  • Wireless operation - no physical connection to cellular phone
  • In building and in vehicle models available
  • Increases signal strength in buildings for 800MHz Cellular and 1900MHz PCS frequencies
  • Allows multiple phones to be used simultaneously
  • Increases your cellular phone's range
  • Low cost solution for uncompromised performance
  • Compatible with 800Mhz Cellular Analog (AMPS) and Digital (CDMA, TDMA, GSM) as well as 1900MHz PCS Digital (CDMA, TDMA, GSM)

Coverage:

This small office system is designed to cover 5k to 10k sq ft (or more) depending upon the strength of the donor (outside signal.) For more coverage area, additional systems may be required.

Antenna Separation:

In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. The following rules will help you maintain adequate separation:

  • Ensure that the exterior Yagi antenna is aimed away from the interior dome antenna.

  • Ensure that you have 45' of separation between the interior and exterior antennas. Depending upon outside signal strength as well as if you choose the 60dB Cellular amplifier or higher, you may need 75' of antenna separation.

 

How dB Affects Coverage:

A 6dB increase in signal doubles the interior coverage distance while a 6dB decrease will halve your interior coverage distance. Likewise, a 3dB increase will increase the interior coverage distance by 43% and a 3dB decrease will decrease it by 30%. For this reason, we recommend mounting the exterior antenna as high as possible (to clear obstructions) in order to obtain a stronger donor signal. Also, if you are dealing with extremely poor signals and require longer cable runs we recommend using lower loss LMR-600 cable.

 

Additional Documentation:

This documentation is for Wilson Cellular Amplifier/Repeaters but much of it will be applicable to this system.

 

Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it.

Related Products

YMW4-YMST4: Antenex 4' x 1-1/4
FMW4-YMST4: Antenex (Laird Technologies) 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Your Price: $89.95
FMW4-YMST4: Antenex (Laird Technologies)  4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Includes 4' mast and two standoff wall mount brackets. Idea for pole mounted Yagi and Fiberglass antennas
859902WPS-KIT - Lightning Surge Protector/Arrester KIT - Cable and Ground Wire Included
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
859902WPS-KIT - Lightning Surge Protector/Arrester KIT - Cable and Ground Wire Included
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
Add On Interior Antenna Kit for Repeater Systems
Add On Interior Antenna Kit for Repeater Systems
Your Price: $219.95
Add On Interior Antenna Kit for Repeater Systems
Add on interior antenna kit allows you to add a second interior antenna to most repeater systems. Kit includes 2 pre-terminated cables, splitter, and interior antenna
Wilson Cellular Amplifier / Repeater System for 800MHz Cellular
Wilson Cellular Complete Building Amplifier/Repeater System for 800Mhz Cellular
Your Price: Call for Availability
Wilson Cellular Complete Building Amplifier/Repeater System for 800Mhz Cellular
Configurable complete cellular amp (cell phone repeater) system for 800MHz Cellular. Not for Nextel/iDEN, PCS or 1700MHz AWS (T-Mobile US 3G)
50dB (801105), 55dB (CM800/55), 65dB (801165) and 65dB (CM800/65) amplifiers are all in stock.
Amplifier / Repeater System for 1900MHz Full Band PCS
Wilson Cellular Complete Building Amplifier/Repeater System for 1900MHz PCS
Your Price: Call for Availability
Wilson Cellular Complete Building Amplifier/Repeater System for 1900MHz PCS
Configurable complete cellular amp system for 1900MHz PCS. Not for Nextel/iDEN, 800MHz Cellular or 1700MHz AWS (T-Mobile US 3G)

Wilson Cellular Complete Dual-Band Building Amplifier/Repeater System for 800MHz Cellular & 1900MHz PCS