| | |
|
| |
| | |
|
|
Home > Cell Phone Amplifiers > CM2020-68 - Cellphone Mate 68dB In-Building Wireless Dual-Band Cellular/PCS Amplifier/Repeater
CM2020-68 - Cellphone Mate 68dB In-Building Wireless Dual-Band Cellular/PCS Amplifier/Repeater
|
List Price: $1,398.00
Your Price: $749.95 Hot Price - Buy Now!
IN STOCK
Item Number: CM2020-68
Manufacturer: Cellphone-Mate
Manufacturer Part No: CM2020-68
NEW! High gain 68dB on both bands. True Multi-carrier repeater unit. Industrial grade with individual uplink and downlink attenuation. Use an omni or yagi donor antenna and dome or panel interior antenna. 2 Year Warranty.
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
Select Options Below
Exterior Donor Antenna Option
Exterior Antenna Mount
Lightning Protector
Coax Cable - Rooftop Exterior Donor Antenna to Repeater Unit
Coax Cable - Repeater Unit to Interior Broadcast Antenna
Interior Broadcast Antenna Options
|
Introducing the New! Cellphone Mate CM2020 Dual Band Universal In-building Amplifier/Repeater. The CM2020 is a high gain 68dB dual band repeater that extends cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. Cellphone-Mate amplifiers are network compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system.
This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.
The signal from the cellular tower is received by the outside antenna and then amplified and repeated to your phone through the inside antenna. When the phone transmits, it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.
The higher gain of the CM2020 repeater allows it to provide greater coverage area and more easily drive multiple interior antennas. Repeater includes AC power supply and mounting bracket.
Features:
- 68dB Reconfigurable, dual band, fit different sized buildings
- Automatic Level control (ALC) to help prevent overload
- Uplink/Downlink oscillation detection (individual LEDs)
- Wireless operation - no physical connection to cellular phone
- 3 Watts Output Power when used with recommended 9dB or higher gain exterior antenna
- Compatible with Cellular/PCS Carrier technologies including (GSM/GPRS, CDMA, TDMA, APMS/Analog) Exceptions: iDEN (Nextel, Southern LINC, Mike) and 1700MHz Aws (T-Mobile US 3G) and 4G Data
- Allows multiple phones to be used simultaneously
- 2 year manufacturer warranty
When designing your system, please be sure to allow for 70' of separation between the interior and exterior antennas (20' which must be vertical).
Important Information Regarding Coverage:
- Coverage is dependent upon the strength of the signal received from the tower at the outside antenna. At the location that the outside antenna is mounted a signal strength of at least 3 bars is required. Use of a high-gain directional antenna for the outside antenna improves coverage area.
|
Requires:
Optional:
Compatibility:
- Compatible with all Cellular/PCS Carriers and technology (GSM/GPRS, CDMA, TDMA, AMPS/Analog)
- Not compatible with iDEN (Nextel, Southern LINC, Mike)
- Not compatible with 1700MHz AWS (T-Mobile US 3G)
Please note that many carriers (Verizon, AT&T, Alltel, US Cellular and others operate on 800MHz Cellular, 1900MHz PCS or both depending upon your location. CheckZip can be used to determine which frequencies are licensed by your carrier in your area.
|
Complete Kits:
The SureCall CM2020 is also available as part of the following complete repeater kits:
Documents:
SureCall CM2020 Catalog Page(PDF)
CM2020 Installation Manual (PDF)
|
|
|
|
Example picture: Antennas and cabling pictured are not included and amplifier shown is different.
|
Specifications
|
| Part Number
|
CM2020 68dB
|
| Frequency
|
824-849, 1850-1910MHz Uplink
869-894, 1930-1990MHz Downlink
|
| Gain (up/down)
|
Reconfigurable gain, 68dB MAx
|
Maximum RF
Output Power
|
3 Watts EIRP
|
| Impedance
|
50 ohms
|
| Noise Figure
|
Maximum 5dB
|
| VSWR
|
Less than 2 :1
|
| AC Power
|
Input: AC110V, 60 Hz;
Output; DC9V
|
| Power consumption
|
<9W
|
FCC ID
Canada IC
|
RSNDUAL-75UNDER
7784A-D75UNDER
|
| Connectors
|
N/Female, 50 Ohms
|
| Dimensions
|
10.94 x 10.43 x 2.56 (inch)
|
| Weight
|
4.72 lbs
|
| Warranty
|
2 year
|
|
List Price: $1,199.95
Your Price: $1,099.95
You Save: $100.00 (8 %)
Configurable complete dual-band repeater system for 800MHz Cellular and 1900MHz PCS. Kit includes rooftop donor antenna, cable assemblies, and inside antenna. True multi-carrier industrial grade system with uplink and downlink manual power control.
|
|
|
Configurable complete dual-band repeater system for 800MHz Cellular and 1900MHz PCS. Not for Nextel/iDEN.
|
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
|
Dual-band panel antenna for use as interior antenna in Amplifier/Repeater/BDA Systems.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
|
|
| | |
CM2020-68 - Cellphone Mate 68dB In-Building Wireless Dual-Band Cellular/PCS Amplifier/Repeater
|
|