| | |
|
| |
| | |
|
|
Home > Cell Phone Amplifiers > CM1900/55 - Cellphone Mate SureCall 55dB In-Building Wireless 1900MHz Cellular Bi-Directional Amplifier (Repeater)
CM1900/55 - Cellphone Mate SureCall 55dB In-Building Wireless 1900MHz Cellular Bi-Directional Amplifier (Repeater)
|
IN STOCK
Item Number: CM1900/55
Manufacturer: Cellphone-Mate
Manufacturer Part No: CM1900/55
High gain 55dB PCS repeater (BDA) for providing wireless in-building coverage. (Cell Phone Amplifier/Repeater)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
SureCall CM1900/55 repeaters extend PCS services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. Cellphone-Mate SureCall amplifiers are network compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system.
This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.
The signal from the cellular tower is received by the outside antenna and then amplified and repeated to your phone through the inside antenna. When the phone transmits, it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.
The higher gain of the CM1900/55 repeater allows it to provide greater coverage area and more easily drive multiple interior antennas. Repeater includes AC power supply and mounting bracket.
Features:
- 55dB gain manually adjustable in 1dB increments down to 33dB
- Automatic gain control (AGC) to help prevent overload
- Uplink/Downlink oscillation detection (individual LEDs)
- CDMA rho: > 0.95
- Wireless operation - no physical connection to cellular phone
- 3 Watts Output Power when used with recommended 9dB or higher gain exterior antenna
- Increases signal strength in buildings for 1900MHz PCS frequencies
- 1850-1990MHz
- Digital (CDMA, TDMA, GSM, etc)
- 800MHz band is unaffected/unamplified
- Allows multiple phones to be used simultaneously
When designing your system, please be sure to allow for 60' of separation between the interior and exterior antennas (20' which must be vertical).
|
Requires:
Optional:
Compatibility:
- Compatible with all 1900MHz PCS service (on-network Sprint PCS, T-Mobile and some Verizon/AT&T) and technologies (CDMA, TDMA, GSM, 1xRTT, GPRS, EDGE, EVDO, HSDPA)
- Not compatible with 800MHz Cellular
- Not compatible with iDEN (Nextel, Southern LINC, Mike)
- Not compatible with 1700MHz AWS (T-Mobile US 3G)
Please note that many carriers (Verizon, AT&T, Alltel, US Cellular and others operate on 800MHz Cellular, 1900MHz PCS or both depending upon your location.CheckZip can be used to determine which frequencies are licensed by your carrier in your area.
|
|
Complete Kits
The SureCall CM800/55 is also available as part of the following complete repeater kits:
|
Example picture: Antennas and cabling pictured are not included and amplifier shown is different.
|
Specifications
|
| Part Number
|
CM1900/55
|
| FCC ID
|
RSNCM2000-55-60-65
|
| Frequency
|
1850-1910MHz Uplink
1930-1990MHz Downlink
|
| Receiver Sensitivity
|
> 110dBm
|
| Gain (up/down)
|
55dB / 55dB Max
|
| Flatness
|
7dB
|
| Isolation
|
80dB
|
| Noise Figure
|
6dB
|
| Attenuators
|
Manual 0-32dB
(1dB increments)
up/down
|
| Max Output Power
|
3 Watts w/9dBi or greater
exterior antenna
|
| Linear Output Power
|
30dBm w/9dBi or greater
exterior antenna
|
| Power Requirements
|
120VAC, 0.21A
|
| Connectors
|
N/Female, 50 Ohms
|
| Dimensions
|
6-3/8* 3-7/8 * 2-1/8 (inch)
|
| Weight
|
2.8lbs
|
|
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
|
|
|
Dual-band panel antenna for use as interior antenna in Amplifier/Repeater/BDA Systems.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
|
Add on interior antenna kit allows you to add a second interior antenna to most repeater systems. Kit includes 2 pre-terminated cables, splitter, and interior antenna
|
Your Price: See Wilson 859957 Two Way Splitter
Allows you to drive two interior antennas (up to 4 using multiple splitters) with a single amplifier/repeater
| |
CM1900/55 - Cellphone Mate SureCall 55dB In-Building Wireless 1900MHz Cellular Bi-Directional Amplifier (Repeater)
|
|