Featuring cell phone antennas, cell phone amplifiers and cell phone repeaters from

Welcome to wpsantennas.com, the largest Wilson Cellular Authorized Cell Phone Antenna and Cell Phone Amplifier Dealer in the country. We are also a Digital Antenna Master Distributor offering Digital Antenna Cell Phone Amplifiers and Repeaters, an ARC Wireless Solutions Distributor featuring the Freedom antenna, an Antenex Distributor offering the full range of high quality Antenex antennas and finally a Wireless Extenders (Wi-Ex) / zBoost Distributor. No matter what your cellular signal issue is, we have a quality solution available for you. Feel free to contact our Customer Representatives and Engineering Staff to help design your solution!

We offer real solutions to your cellular reception problems. Our systems range from simply attaching an external antenna directly to your phone (with or without signal amplification) to multi-phone bi-directional amplifier repeater (Nextel/iDEN, 800 MHz Cellular) systems that rebroadcast a cellular carrier's signal throughout your building. We have solutions available for your business, home, car, truck or RV and all cellular carriers.

We also offer a large selection of Original Equipment and Quality Aftermarket Accessories for a large variety of cellular phones.

Whether you are looking for cell phone antennas, cell phone amplifiers or cell phone repeaters, we have the quality Wilson Cellular and Digital Antenna products that can help solve your cellular reception problem.
 
Configurable complete cellular amp (cell phone repeater) system for 800MHz Cellular. Not for Nextel/iDEN, 1900MHz PCS or 1700MHz AWS (T-Mobile US 3G)

Carrier Grade CSI Bi-Directional Amplifier/Repeater System for 800Mhz Cellular

CSI Bi-Directional Amplifier/Repeater System for 800Mhz Cellular


This item is not typically stocked and will be ordered especially for you. Please allow for extended delivery time. As a special order, it is not eligible for return. After placing your order, we will contact you to provide an estimated delivery date and to help confirm that this is the correct product for your application.

Carrier Grade CSI Bi-Directional Amplifiers Feature:

  • Alphanumeric user interface
    • Integrated digital power/AGC meter allows for precise setup without test equipment
    • User friendly technical language interface
  • Oscillation detection and suppression control feature to prevent network interference
  • Optional remote access of BDA via wireless or wireline modem
    • Web browser interface
    • Remote query of power output, AGC status, gain control and amplifier shutdown/restart
  • Local alarm contact closure points and interface for remote shutdown

    • Installation Guide Addendum (PDF)

This system is a complete kit compatible with 800MHz Cellular Systems. Package will contain all items required to build one full amplifier/repeater system. All cables are crimped and all necessary adapters are included. The only additional items you will typically require are the pole to mount the Yagi antenna on and a ground wire if you chose the optional lightning suppressor. Need custom cables?

We can custom build the cables to your required length using either LMR-400 or lower loss LMR-600. Contact us at (877) 594-5766 for more information.

800MHz systems work for cellular systems using the 824MHz - 896MHz band. The band that your carrier is using depends on your zip code. In particular, this system is not compatible with iDEN (Nextel, Southern LINC, Mike) and PCS only carriers such as Sprint PCS and T-Mobile. If you are unsure of the frequency band you are using, please contact us.

Building Cell Phone Repeater Package Contents:

Does not include pole/mast for mounting Yagi - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)

CSI- Bi-Directional Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. CSI- Bi-Directional Amplifiers are network compatible and enhance the cellular phone user's satisfaction without comprising the operation of the cellular system.

This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.

The signal from the cellular tower is received by the outside antenna and then amplifier and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.

  • Wireless operation - no physical connection to cellular phone
  • In building and in vehicle models available
  • Increases signal strength in buildings for 800MHz Cellular frequencies (824-896MHz)
  • Allows multiple phones to be used simultaneously
  • Increases your cellular phone's range
  • Low cost solution for uncompromised performance
  • Compatible with 800/850MHz Digital (CDMA, TDMA, GSM) and Analog/AMPS

Open area estimates: Walls will decrease coverage distance. Metal, cement and cinderblock walls will severely attenuate or stop signal penetration.

Coverage area is primarily determined by the strength of the outdoor signal and the gain of the amplifier. To determine correct amplifier size, see chart above and documents below.

Antenna Separation:

In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. The following rules will help you maintain adequate separation:

  • Ensure that the exterior Yagi antenna is aimed away from the interior dome antenna.

  • Ensure that you have at least 75' of separation between the interior and exterior antennas when using the 62dB amp and that you have at least 100' of seperation on a 85dB amp.

How dB Affects Coverage:

A 6dB increase in signal doubles the interior coverage distance while a 6dB decrease will halve your interior coverage distance. Likewise, a 3dB increase will increase the interior coverage distance by 43% and a 3dB decrease will decrease it by 30%.

How you can increase the interior coverage distance/area (increase dB):

  1. Use a larger amplifier: The extra 23dB of the CSI-DSP85-C - Cellular Specialties 85dB In-Building Wireless 800MHz Cellular Bi-Directional Amplifier for 800MHz Cellular will provide more then 10 times the interior coverage distance of the CSI-BDA51062-C - Cellular Specialties 62dB In-Building Wireless 800MHz Cellular Bi-Directional Amplifier, However, do not overpower your system (i.e: don't choose the 85dB amplifier when you have full signal outside.)

  2. Improve the signal from the tower: Mount the 301111 Wilson Cellular Yagi antenna higher or where there are less obstructions between it and the tower.

  3. Use less cable: Every 50' of Ultra Low Loss Cable loses 2dB of signal. However, in order to maintain proper separation between the interior and exterior antennas, you must maintain at least 40' to 45' of separation between antennas when using the 62dB amplifier and 75' when using the 85dB amplifier.

Additional Documentation:

Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it.
Price: $3,099.95
Buy Product Online | Visit Store Home
 
Manufactured by Cellular Specialties

  Related Products


  Wilson Cellular Complete Dual-Band Building Amplifier/Repeater System for 800MHz Cellular & 1900MHz PCS - Configurable complete dual-band repeater system for 800MHz Cellular and 1900MHz PCS. Not for Nextel/iDEN or 1700MHz AWS (T-Mobile US 3G).
  Wilson Cellular Complete Building Amplifier/Repeater System for 1900MHz Cellular (PCS) - Configurable complete cellular amp system for 1900MHz PCS. Not for Nextel/iDEN, 800MHz Cellular or 1700MHz AWS (T-Mobile US 3G)
  Wilson Cellular Complete Building Amplifier/Repeater System for iDEN (Nextel, SouthernLINC, Mike) - Configurable complete cellular amp (cell phone repeater) system for 806-866MHz iDEN (Nextel, Southern LINC, Mike). Not for 800MHz Cellular, 1700MHz AWS (T-Mobile US 3G), 1900MHz PCS
  FMW4-YMST4: Antenex (Laird Technologies) 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets) - Includes 4' mast and two standoff wall mount brackets. Idea for pole mounted Yagi and Fiberglass antennas
  Add On Interior Antenna Kit for Repeater Systems - Add on interior antenna kit allows you to add a second interior antenna to most repeater systems. Kit includes 2 pre-terminated cables, splitter, and interior antenna


 
  Return To wpsantennas.com - Wilson Cellular, Digital Antenna, ARC Wireless, Wi-Ex & Antenex Cell Phone Antennas & Amplifiers: Cellular Amps, Cell Amplifier, Cell Phone Amplifier, Cell Phone Repeater, Cell Phone Antenna, Cell Phone Antennas, and Digital Antenna Cellular Antennas, Cell Signal Amplifiers, Repeaters and Boosters for Boat, RV, Car, Truck, Home and Office

 

 

Our products are also known as cellular antenna, cellular antennas, cell phone antenna, cell phone antennas, cellular amp, cellular amps, cell phone amp, cell phone amps, cellular amplifier, cellular amplifiers, cell amplifier, cell amplifiers, cell phone amplifier, cell phone amplifiers, cell signal booster, and cell signal boosters.

E-Mail Copyright 2001-2007 wpsantennas.com
7389 Airport View Dr SW Ste 200, Rochester, MN 55902		 (877) 594-5766
M-F 8AM-5:30PM Central

e-commerce software
E-commerce powered by MonsterCommerce shopping cart software.