|
801213 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800/1900MHz Cellular/PCS Amplifier Kit (Includes Magnetic Mount Antenna and Cradle Plus)
|
This kit contains the
Wilson Cellular 801201 Vehicle Repeater, the
301103 Magnetic Mount Antenna,
and the Wilson Cellular Cell
Phone Cradle Plus
- everything you need.
Wilson Cellular In-Vehicle Amplifiers extend
cellular services in poor coverage areas by amplifying both transmit and receive
signals. The amplifier reduces problems with signal fades and dropped calls
while improving voice quality, service range and access. Wilson Cellular
amplifiers are network-compatible and enhance the cellular phone user's
satisfaction without compromising the operation of the cellular system.
Features:
- Passes TIA/EIA-98-E Transmit test for
evaluation CDMA Cellular Phones
- Power Control Logic ensures maximum output
power is within Cellular Standards
- Allows multiple phones to be used
simultaneously
- Allows cellular phone to operate properly
with all types of modulations including CDMA
- Maximum 3 Watts output power
- Designed for all cellular systems: AMPS,
CDMA, EDGE, GPRS, GSM and TDMA (not compatible with Nextel/iDEN)
- Automatic Gain Control
- Overload Protection Circuit - Protects cell
system from overload
- Automatic Reset - if overload occurs
- FCC Type Accepted
|
Application Note: Mobile cell phone repeaters are great for use in urban areas where you are experiencing dropped calls and poor connections. For usage in rural areas where signal is worse, a direct connect (inline) cell phone amplifier will perform much better. |
What are the benefits of
Wilson Cellular Wireless Mobile Amplifiers?
The Wilson Cellular Wireless Amplifiers allow
one or more users to benefit from an outside antenna and amplifier without a
physical connection to the cell phone. This eliminates the need for an external
antenna connection on the cell phone.
Note: In order to maintain improved signal, your phone
must be left in
cradle during usage (i.e.
you must use a headset or hands free car kit.)
Wireless Cell Phone Amplifier
vs Direct Connection Amplifier?
The Wilson Cellular Wireless Amplifiers and
Direct Connection Cell Phone Amplifiers
perform comparably in urban situations. Both amplifiers transmit up to 3 Watts of power to the cell
site and receive a signal as weak as -110dBm. For rural applications, the direct connect (inline) cell phone amplifier
will perform better and is recommended.
Does the Wilson Cellular
Wireless Mobile Amplifier affect a carrier's cell site?
Wilson Cellular's Wireless Mobile Amplifiers
have Smart Technology that automatically adjusts the power based upon the cell
site's requirements. This patent pending technology ensures that the power to
the cell site is within the carrier's specifications.
Includes:
Notes:
- The 801201 Mobile Cell Phone Repeater uses different power
supplies than the previous amplifiers. You can not use the older power
supplies 859903, 859904 or 859905.
Compatibility:
- Compatible with all 800MHz Cellular
and 1900MHz PCS providers (CDMA, TDMA, GSM, Analog). For example, Verizon,
Cingular, Alltel, US Cellular, Midwest Wireless, Cellular One, Western
Wireless, Sprint PCS, T-Mobile, Qwest and many more
- Not compatible with
iDEN (Nextel, Southern LINC, Mike)
801201 Mobile Cell Phone Repeater Catalog Page (PDF)
801201 Mobile Cell Phone Repeater Flyer / Amplifier Comparison (PDF)
801201 Mobile Cell Phone Repeater Installation Guide (PDF)
|
Specifications |
| Part Number |
|
801213 |
| Frequency |
|
824-894MHz,
1850-1990MHz |
| Gain (up/down) |
|
40dB /
45dB |
| Linear Output Power |
|
+30dBm |
| Max Output Power |
|
3 Watts (Cell Site Controlled) |
| Max RF (up/down) |
|
+35dBm / +10dBm |
| Noise Figure (down) |
|
3dB Nominal |
| Flatness |
|
+/- 4dB |
| Isolation |
|
> 90dB |
| Power Consumption |
|
6V, 0.5A - 1.5A (subject to Uplink
Power) |
| Connectors |
|
FME Male, 50 Ohms |
| Dimensions |
|
4.5
* 3.5 * 1.25 (inch) |
| Weight |
|
1.5 lbs |
NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other dashboard or friction mounting options should be used. Wpsantennas.com does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)
|
Price: $459.95
Buy Product Online | Visit Store Home
|
|
|
Manufactured by Wilson Cellular / Wilson Electronics |
|
|
|
Related Products
811201 - Wilson Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier - Compatible with all Cellular/PCS Carriers and technology (GSM, GPRS, EDGE, CDMA, EVDO, EV-DO, TDMA, AMPS/Analog) except iDEN (Nextel, Southern LINC, Mike)
859923 - Hardwire Power Harness for 6V Wilson Cellular Amplifiers - Used to hardwire 6V Wilson Cellular Amplifiers direct to vehicle battery. Compatbile with 6V amplifiers only (801201). Not compatible with 811201, 812201 and other 12V amplifiers
859912 - AC Power Supply for Wilson Cellular 6VDC Amplifiers - 120VAC Adapter for 6VDC Wilson Cellular Amplifiers (801201)
859909 - Carry Case for Wilson Cellular Mobile Amplifiers - Convenient carry case to help protect your amplifier
301146 - Wilson Cellular Cell Phone Cradle Plus (with Antenna Connection) - Cradle with antenna coupler connection offers all the convenience features of the standard cradle with the added benefit of a built-in cell phone signal antenna/coupler
|
|
Other Items from Unhidden
Wi-Ex zBoost 2GHz Rated F/Female to F/Female Cable Splice (YX70-2081) - 2GHz rated splice which allows you to connect two RG-6 or RG-11 (F/Male terminated - both ends) cables together.
Please note that you must use a 2GHz rated splice - standard CATV splices do not support the full frequency range required.
Wi-Ex zBoost Dual-Band Exterior Antenna Upgrade (YX029-PCS-CEL) - Outdoor antenna upgrade kit increases the coverage area of the YX510-PCS-CEL and Wilson 801247 Signalboost DT repeater kit.
Wi-Ex zBoost Window Entry Cable (YX030-0W8) - Allows you to pass the signal through a window frame. The connector ends are F (Female) to F (Female).
This product is ONLY compatible with Wi-Ex zBoost repeater kits (YX500-PCS, YX500-CEL, and YX510-PCS-CEL) or
Wilson 801247 Signalboost DT
Wi-Ex zBoost Outside Antenna Grounding Kit (YX012) - Grounding kit to allow you to ground Wi-Ex zBoost exterior antenna
Wi-Ex zBoost Dual-Band Cellular/PCS Indoor Panel Antenna (YX027-PCS-CEL) - Optional upgrade base unit antenna for the YX500-CEL which replaces the omni-directional flexible antenna with a higher gain directional antenna to provide a larger area of improved indoor coverage. This antenna is a dual-band antenna for the cellular and/or the PCS band.
801248 - Wilson SIGNALBOOST Vehicle Wireless Dual-Band Cellular/PCS Amplifier - Dual-Band Cellular/PCS Wireless Mobile Amplifier with Smart Technology (TM). Allows the benefit of an external antenna and up to 3 Watts output power without a physical connection to the cell phone.
951129 - 8 3/4" White Flat Coax cable - Allows you to pass the signal through a window frame. The connector ends are F (Female) to F (Female).
This product is ONLY compatible with Wilson 801247 Signalboost DT or Wi-Ex zBoost repeater kits (YX500-PCS, YX500-CEL, and YX510-PCS-CEL)
GR8UFMEFI: Antenex/Laird Technologies 3/4" Style Magnetic Mount Base (With Rubber Boot) with 12' RG58U Cable, FME/Female Crimp (Installed) - Antenex/Laird Tech Magnetic Mount (with rubber boot) with 12' RG58U cable
Booster Antenna for Franklin Wireless CDU-680 (CDU680DORA) - Includes Antenna and Adapter Cable - Package includes ARC Wireless Freedom Booster Antenna and Franklin Wireless CDU-680 (CDU680DORA) Antenna Adapter Cable. Ideal for use in your home or office. Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel. Compatible with US and European frequency bands.
As mentioned in Smart Money magazine (October 2005) and The New York Times (March 1, 2007)
801213 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800/1900MHz Cellular/PCS Amplifier Kit (Includes Magnetic Mount Antenna and Cradle Plus) - Dual-Band Cellular/PCS Wireless Mobile Amplifier with Smart Technology (TM). Allows the benefit of an external antenna and up to 3 Watts output power without a physical connection to the cell phone. (801201 - Cell Phone Amplifier/Repeater)
Includes magnetic mount antenna and cradle plus
859942 - Wilson Cellular Cell Phone Cradle (no Antenna Connection) - Cradle enables you to place your cell phone in a convenient location in your vehicle and use it with a hands-free device such as an ear bud or Bluetooth product
Wilson branded cradle is not yet available - substituting identical Bracketron
|
|
Return To wpsantennas.com - Wilson Cellular, Digital Antenna, ARC Wireless, Wi-Ex & Antenex Cell Phone Antennas & Amplifiers: Cellular Amps, Cell Amplifier, Cell Phone Amplifier, Cell Phone Repeater, Cell Phone Antenna, Cell Phone Antennas, and Digital Antenna Cellular Antennas, Cell Signal Amplifiers, Repeaters and Boosters for Boat, RV, Car, Truck, Home and Office
|
|
|
|
Our products are also known as
cellular
antenna, cellular antennas, cell phone antenna,
cell phone antennas, cellular amp, cellular
amps, cell phone amp, cell phone amps, cellular
amplifier, cellular amplifiers, cell amplifier,
cell amplifiers, cell phone amplifier, cell
phone amplifiers, cell signal booster, and cell
signal boosters.
|
E-Mail |
Copyright 2001-2007
wpsantennas.com
7389 Airport View Dr SW Ste 200, Rochester, MN 55902 |
(877) 594-5766
M-F 8AM-5:30PM Central |
|
|
