|
|
Inline Boosters
Wilson Cellular Inline boosters connect inline between a Wilson Cellular antenna and Wilson Cellular adapter.
They allow the phone to send up to a 3 Watt signal back to the cellular tower
(the same power as the old bag phones.)
Wilson Cellular Inline boosters are commonly used in vehicle applications and can also be connected to most full install car kits. They are also popular for building locations where signal is poor.
Features:
- Advanced Electronics Receive & Transmit
Better Than Your Cellular Phone
- Significantly Increases Your Cellular
Phone's Range on Send & Receive
- High Output Power allows more Users on the
System
- Safer Than Using Your Cellular Phone
Without An Amplifier
- Extends the Life of Your Cellular Phone
Battery
- FCC Type Accepted

|
|
Direct
Connecting Bi-Directional Dual-Band (800/1900MHz) Cellular Amplifier |
Direct
Connecting Bi-Directional 800MHz Cellular Amplifier |
Direct
Connecting Bi-Directional iDEN/Nextel Amplifier |
|
Frequency Range |
AMPS 824-894 MHz
PCS 1850-1990 MHz |
AMPS 824-894 MHz (Amplified)
1900MHz Antenna Only |
iDEN / Nextel 806-866 MHz |
|
Use |
Mobile, Marine, In-Building |
Mobile, Marine, In-Building |
Mobile, Marine, In-Building |
|
Wired Operation |
Connects directly to cell phone using appropriate
cell
phone external antenna adapter |
Connects directly to cell
phone using appropriate
cell
phone external antenna adapter.
Not compatible with 1900MHz
carriers (Sprint, T-Mobile, AT&T GSM, etc) |
Connects directly to cell
phone using appropriate
cell
phone external antenna adapter |
|
Max Output Power |
3W |
3W |
3W |
|
Gain (Up/Down) |
Cell site controlled - Max 10/10 |
Cell site controlled - Max
10/10 |
Cell site controlled - Max
10/10 |
|
Max RF
(Up/Down) |
+35dBm, +15dBm |
+35dBm, +15dBm |
+35dBm, +15dBm |
|
Flatness
(Up/Down) |
+/- 2dB, +/- 2dB |
+/- 2dB, +/- 2dB |
+/- 2dB, +/- 2dB |
|
Noise Figure (Down) |
3.5dB Nominal |
3.5dB @ 881MHz |
3.5dB @ 881MHz |
|
Isolation
|
90dB |
90dB |
90dB |
|
Documents (PDF) |
811201 Cellular
Amp Catalog Page
|
811101 Cellular
Amp Catalog Page
|
814001 Cellular
Amp Catalog Page
|
|
Part # (Store Link) |
811201 |
811101 |
814001 |
|
Wilson Cell/PCS Direct Connect Amplifier
Wilson dual band
824-894 MHz (Cellular) 1850-1990 MHz (PCS) direct connection
bi-directional amplifier provides up to 3 watts maximum
(Cellular)/ 2 watts (PCS) output power with automatic gain
control and a protection circuit for cell system overload.
-
Connects directly to cellphone with a phone adapter
(not included).
-
Significantly increases your cellphone's range on
send and receive
-
Power control logic ensures maximum output power is
within cellular standards
|
- FME
male connectors
- FCC
type accepted
-
Includes 6' phone adapter extension cable with FME
female ends. Purchase outside antenna and phone
specific adapter cable separately.
|
811201 - Wilson Cellular 800MHz/1900MHz Dual-Band 3 Watt Direct
Connection Amplifier
Wilson Cellular Direct Connect Amplifier
Wilson 824-894
MHz (Cellular) direct connection bi-directional amplifier
provides up to 3 watts maximum output power with automatic gain
control and a protection circuit for cell system overload.
-
Connects directly to cellphone with a phone adapter
(not included).
-
Significantly increases your cellphone's range on
send and receive
-
Power control logic ensures maximum output power is
within cellular standards
|
- FME
male connectors
- FCC
type accepted
-
Includes 6' phone adapter extension cable with FME
female ends. Purchase outside antenna and phone
specific adapter cable separately.
|
811101 - Wilson Cellular 800MHz Single Band 3 Watt Direct
Connection Amplifier
Wilson iDEN Direct Connect Amplifier
Wilson 806-866
MHz (iDEN/Nextel) direct connection bi-directional amplifier. It
provides up to 3 watts maximum output power with automatic gain
control and a protection circuit for cell system overload.
-
Connects directly to cellphone with a phone adapter
(not included).
-
Significantly increases your cellphone's range on
send and receive
-
Power control logic ensures maximum output power is
within cellular standards
|
- FME
male connectors
- FCC
type accepted
-
Includes 12VDC cigarette lighter plug cable and 6'
phone adapter extension cable with FME female ends..
Purchase outside antenna and phone specific adapter
cable separately.
|
814001 - Wilson Cellular Nextel/iDEN 3 Watt Direct Connection
Amplifier
If
you would prefer not to have your cell phone connected to a cell
phone amplifier or antenna, we have wireless vehicle repeaters
available:
Wilson Cellular
Dual-Band Wireless Amplifier
Wilson Dual-Band
(800MHz Cellular/1900MHz PCS) In-vehicle wireless 40 dB
bi-directional amplifier (cell phone repeater) provides up to 3 watts maximum output
power (800MHz band), 2 watts maximum output power (1900MHz band)
with automatic gain control and a protection circuit for cell
system overload.
- Wireless operation. No physical connection to
cellphone
- Significantly increases your cellphone's range on
send and receive
- Allows multiple phones to be used simultaneously
- Designed for all cellular and PCS systems including
AMPS, CDMA, EDGE GPRS, GSM and TDMA. (Not compatible
with iDEN/Nextel)
- Uplink/Downlink overload protected with automatic
reset
|
- Automatic gain control
- Requires a separation distance of 4' -5' between
inside and outside antennas
- FME
male connectors
- FCC
type accepted
- Includes inside vehicle antenna. Requires outside
antenna.
|
801201 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band
800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier (Requires exterior cellular antenna)
Wilson Cellular
800MHz iDEN (Nextel) Wireless Amplifier
Wilson 806-866
MHz (iDEN/Nextel ) In-vehicle wireless 37 dB bi-directional
amplifier (cell phone repeater) features advanced electronics that allows you to
receive and transmit better than your cellphone.
- Wireless operation. No physical connection to
cellphone
- Significantly increases your cellphone's range on
send and receive
- Allows multiple phones to be used simultaneously
- Uplink/Downlink overload protected with automatic
reset
- Automatic gain control
|
- Requires a separation distance of 4' -5' between
inside and outside antennas
- FME
male connectors
- FCC
type accepted
- Includes inside vehicle antenna. Requires outside
antenna.
- Not
compatible with Cellular/PCS Carriers
|
804002 - Wilson Cellular 37dB In-Vehicle Wireless Bi-Directional
Amplifier for iDEN (Nextel, Southern LINC, Mike) (Requires exterior cellular antenna)
Digital Antenna Dual Band Wireless Amplifier
Automobile Kit
Digital Antenna
824-894/1850-1990 MHZ (cellular/PCS) dual band wireless 38 dB
automobile amplifier (cell phone repeater) kit improves reception with up to 3 watts
of power, reducing dropped calls and producing clearer and
stronger signals. Includes all accessories for your automobile.
- Wireless operation. No physical connection to
cellphone
- Extends the life of the battery
- Enhances data connection for improved internet, fax
and test messaging
- Dynamic Variable Gain Control regulates signal to
tower
- Use
with all 800/1900 MHz and tri-mode phones (CDMA,
TDMA, GPRS, PCS, GSM 850/1900 and AMPS. Not
compatible with iDEN/Nextel.
|
- Requires a minimum separation distance of 5' (up to
20') and a wall/roof between inside and outside
antennas
- Mini
UHF female connectors
- FCC
approved
- Includes internal antenna, external magnet mount
antenna and Includes 12VDC cigarette lighter plug
cord.
|
DA4KMR-10A - Digital Antenna 3 Watt 38dB Gain Dual-Band Wireless
Cellular Vehicle Amplifier / Repeater - COMPLETE AUTOMOBILE KIT
Digital Antenna Dual Band Wireless Amplifier
RV/Marine (Large) Kit
Digital Antenna
824-894/1850-1990 MHZ (cellular/PCS) dual band wireless 38 dB
RV/boat amplifier (cell phone repeater) kit improves reception with up to 3 watts of
power, reducing dropped calls and producing clearer and stronger
signals. Includes all accessories for your RV or boat.
- Wireless operation. No physical connection to
cellphone
- Extends the life of the battery
- Enhances data connection for improved internet, fax
and test messaging
- Dynamic Variable Gain Control regulates signal to
tower
- Use
with all 800/1900 MHz and tri-mode phones (CDMA,
TDMA, GPRS, PCS, GSM 850/1900 and AMPS. Not
compatible with iDEN/Nextel.
|
- Requires a minimum separation distance of 20' and a
wall/roof/bulkhead structure between inside and
outside antennas
- Mini
UHF female connectors
- FCC
approved
- Includes internal antenna, external 9dB antenna with
mounting bracket, 30' low loss extension cable with
connectors, Includes 12VDC cigarette lighter plug
cord. and 120 VAC power supply.
|
DA4KMR-30U - Digital Antenna 3 Watt 38dB Gain Dual-Band Wireless
Cellular Amplifier / Repeater for RV/Marine - COMPLETE RV/MARINE
(LARGE) KIT
|