| | |
|
| |
| | |
|
|
859902WPS - Lightning Surge Protector/Arrester
|
List Price: $99.95
Your Price: $79.95
You Save: $20.00 (20 %)
IN STOCK
Item Number: 859902WPS
Manufacturer: wpsantennas.com
Manufacturer Part No: 859902WPS
Protects amplifier from surges resulting from outside antenna being struck by lightning
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
Protect sensitive electronic communications equipment from the damaging effects of lightning strike electrical surges.
Features:
- Reliable performance from DC-3GHz
- High quality construction
- Easily replaced gas tube element
- Multi-strike capability
- Bi-directional protection
- Amplifier friendly - protector will pass DC
This model features wide-band operation up to 3GHz. Due to its superior RF performance, this unit is ideal for IEEE 802.11b/g Wireless LAN applications, as well as ISM, MMDS, Cellular, iDEN and PCS applications. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable such as remote amplifiers and LNAs.
This unit offers multi-strike capability via a replaceable gas tube element. A ground lug and terminal are supplied directly on the lightning protector housing providing superior grounding.
Protector is inserted inline between outside antenna and amplifier. The protector does not connect directly to the amplifier. Typically, a 2' LMR-400 jumper cable is used to connect the protector to the amplifier although any length of LMR-400 coax may be used.
For example, you can run LMR-400 coax from the Yagi on the roof to the lightning protector (mounted just outside the building) and then another run of LMR-400 coax cable from the lightning protector to the amplifier mounted in the building.
The lightning protector must be grounded.
Specifications:
- Frequency Range: 0-3GHz
- VSWR: 1:1.3 Max
- dB Loss: 0.4dB Max
- Impedance: 50 Ohm
- Gas Tube Voltage Rating: 230V
- Connectors: N/Female, both ends (one end is bulkhead)
Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it. |
Your Price: $559.95 - If found cheaper elsewhere, Dealer may not be Authorized!
850 and 1900 MHz dual band wireless repeater kit. Comes complete with antennas, coax cable and amplifier unit. Designed for use in the U.S.A. and in countries that use the same frequencies. (DA4000SBR - 50U)
|
Your Price: Discontinued: See EFlex65-Kit
Plug and Play Kit! Includes cable and antennas!
Configurable complete In-Building Wireless Dual-Band SOHO Cellular/PCS Amplifier/Repeater kit designed for small office and home office use.
|
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
|
|
|
Finished cable with N/Male ends.
Ultra low loss jumper for connecting amplifier to splitter or lightning suppressor
|
List Price: $1,099.95
Your Price: No longer available
Complete cellular amp (cell phone repeater) kit for 800MHz iDEN (Nextel. Southern LINC, Mike)
60dB (804006), Yagi and panel antenna plus 1 - 30' and 1 - 50' Wilson-400 cable assemblies. Ready to Plug and Play!
|
Your Price: Call for Availability
65dB (801365), Yagi and panel antenna plus 1 - 20' and 1 - 50' Wilson-400 cable assemblies. Ready to Plug and Play!
|
Your Price: Call for Availability
65dB (801165), Yagi and panel antenna plus 1 - 30' and 1 - 50' Wilson-400 cable assemblies.
| |
859902WPS - Lightning Surge Protector/Arrester
|
|