859901 - Dual-Band 800/1900MHz 2-Way Splitter

For use in signal distribution systems to split the amplified signal to up to 4 antennas with minimal signal loss. Weatherproof case for indoor or outdoor use.

Our standard units are offered with N/Female connectors and are capable of handling 10W of power into a matched load. These units are ideal for in-building applications that require the combining or dividing of RF to accommodate multiple antenna locations.

This 2-way splitter allows you to drive two interior antennas from a single amplifier/repeater. Because you are splitting the signal each antenna will receive approximately 1/2 of the signal which equates to about 70% of the coverage distance when compared to driving a single antenna.

Connecting splitter to amplifier: Typically the splitter is connected to the amplifier using the 2' LMR-400 coax extension but any length of LMR-400 cable may be used.

Connecting antennas to the splitter:

• The 301121WPS Dual-Band (Multi-Band) Ceiling Mount dome antenna, 301121 Wilson Cellular Dual-Band Ceiling Mount Dome antenna and 301135 - Wilson Cellular Dual-Band Directional Panel Antenna must be connected to the splitter using LMR-400 cable
• Other Wilson Electronics antennas may be connected directly to the splitter using either the N/Male to FME/Male adapter or using a length of LMR-400 cable.

Specifications:

• Frequency: 800MHz Cellular, 800MHz iDEN, 1900MHz PCS bands
• Signal Reduction: 3.5dB
• Connectors: N/Female

Documents:

• Catalog Page (PDF)