Search
Browse by Manufacturer
Browse Categories
Shopping Cart
Your cart is empty.




McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



841365 - Wilson Cellular Complete Building Amplifier/Repeater System for 1900Mhz PCS

Your Price: Call for Availability
Out of stock - Please Call
Item Number: 841365
Manufacturer: Wilson Electronics
Manufacturer Part No: 841365
65dB (801365), Yagi and panel antenna plus 1 - 20' and 1 - 50' Wilson-400 cable assemblies. Ready to Plug and Play!

Cell phone antennas and amplifiers are frequency specific (more info).

Select Options Below

* denotes required field

Antenna Mount*
Lightning Protector*
Phone models used?
(If an adapter is available we will include adapter and Yagi test adapter to help aim Yagi)
Answer
Zip code where system is to be used:*
Answer
Carriers system will be used with:*
Answer

Wilson Cellular's new series of Smart Technology In-Building Cell Phone Amplifiers (cell phone repeaters) offer exceptional performance without causing harmful interference to the cell site.

The new 841365 1900 MHz Wilson cellular repeater kits are in stock for immediate purchase.

Wilson Cellular Smart Technology Amplifier Features:

  • Greater than 65dB (801365) computer controlled adjustable AGC dynamic range

  • Automatic Gain Adjusting in the event of oscillation or overload

  • 10dB Gain Steps 35-65dB (801365)

  • Automatic shutdown on overload

  • Uplink squelch - optional

  • TIA/EIA-98-E 3.5.1 Receiver Sensitivity better than -110dBm

  • CDMA/rho > 0.912

  • LED Indicators for Power, Oscillation and AGC

  • 3 Watts Max Output Power

  • +30dBm Linear Output Power

  • +30dBm Max RF up/down

Installation Guide Addendum (PDF)

 

This system is a complete kit compatible with 1900MHz PCS Systems. Package will contain all items required to build one full amplifier/repeater system. All cables are crimped and all necessary adapters are included. The only additional items you will typically require are the pole to mount the Yagi antenna on and a ground wire if you chose the optional lightning suppressor.   Need custom cables?

We can custom build the cables to your required length using either LMR-400 or lower loss LMR-600. Contact us at (877) 594-5766 for more information.

1900MHz systems work for cellular systems using the 1850 MHz - 1990 MHz band. The band that your carrier is using depends on your zip code. In particular, this system is not compatible with iDEN (Nextel, Southern LINC, Mike) and Cellular only carriers. If you are unsure of the frequency band you are using, please contact us.

Zip Code/Carrier Name: We require you to provide us with your carrier's name and the zip code where the system is to be used so that we can check system compatibility.

Note regarding 65dB amplifier: If you intend to purchase the 65dB amplifier or higher, please ensure that you have at least 70' of cable in your system to allow for adequate antenna separation and do not use if you have 'full' signal outside.

The Wilson 843106 Building Cell Phone Repeater Package Contents:

Does not include pole/mast for mounting Yagi - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)

Wilson PCS Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. Wilson Cellular amplifiers are network compatible and enhance the cellular phone user's satisfaction without comprising the operation of the cellular system.

This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.

The signal from the cellular tower is received by the outside antenna and then amplifier and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.

  • Wireless operation - no physical connection to cellular phone
  • In building and in vehicle models available
  • Increases signal strength in buildings for 1900MHz PCS frequencies (1850-1990MHz)
  • Allows multiple phones to be used simultaneously
  • Increases your cellular phone's range
  • Low cost solution for uncompromised performance
  • Compatible with 1900 MHz Digital CDMA, GSM.

Open area estimates: Walls will decrease coverage distance. Metal, cement and cinderblock walls will severely attenuate or stop signal penetration.

Coverage area is primarily determined by the strength of the outdoor signal and the gain of the amplifier. To determine correct amplifier size, see chart above and documents below.

Antenna Separation:

In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. The following rules will help you maintain adequate separation:

  • Ensure that the exterior Yagi antenna is aimed away from the interior dome antenna.

  • Ensure that you have 45' of separation between the interior and exterior antennas when using the 50dB Amplifier and 70' of separation between the antennas when using the 65dB amplifier or higher. Of that, at least 20' should be vertical separation (the Yagi should be mounted at least 20' higher than the interior panel antenna.)

 

How dB Affects Coverage:

A 6dB increase in signal doubles the interior coverage distance while a 6dB decrease will halve your interior coverage distance. Likewise, a 3dB increase will increase the interior coverage distance by 43% and a 3dB decrease will decrease it by 30%.

How you can increase the interior coverage distance/area (increase dB):

  1. Use a pre-amplifier: The extra 14dB of the 812201 Wilson Cellular Amplifier will provide over 3 times the interior coverage distance (please contact wpsantennas.com technical support for purchase).  However, do not overpower your system (i.e: don't chose the 65dB amplifier plus the pre-amplifier when you have full signal outside.)

    Use less cable: Every 50' of Ultra Low Loss Cable loses 2dB of signal. However, in order to maintain proper separation between the interior and exterior antennas, you must maintain at least 40' to 45' of separation between antennas when using the 50dB amplifier and 75' when using the 60dB amplifier or higher.

  2. Improve the signal from the tower: Mount the 301124 Wilson PCS Yagi antenna higher or where there are less obstructions between it and the tower.

 

Additional Documentation:

Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it.

Related Products

301121WPS - Dual-Band Ceiling Mount Omni-Directional Dome Antenna (only for use as interior antenna in repeater system)
Your Price: $59.95
301121WPS - Dual-Band Ceiling Mount Omni-Directional Dome Antenna (only for use as interior antenna in repeater system)
Dual-band (Multi-band 806-960MHz, 1700-2500MHz) dome ceiling mount antenna for use as interior antenna in Amplifier/Repeater/BDA Systems. (wpsantennas 301121-WPS)
301124 - Wilson Cellular PCS Yagi (1850MHz-1990MHz) Cell Phone Antenna -  High gain yagi directional cell phone antenna - for 1850MHz-1990MHz PCS only.
301124 - Wilson Cellular PCS Yagi (1850MHz-1990MHz) Cell Phone Antenna
Your Price: $79.95
301124 - Wilson Cellular PCS Yagi (1850MHz-1990MHz) Cell Phone Antenna
High gain yagi directional cell phone antenna - for 1850MHz-1990MHz PCS only.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA - 1900MHz PCS Band Only
YMW4-YMST4: Antenex 4' x 1-1/4
FMW4-YMST4: Antenex (Laird Technologies) 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Your Price: $89.95
FMW4-YMST4: Antenex (Laird Technologies)  4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Includes 4' mast and two standoff wall mount brackets. Idea for pole mounted Yagi and Fiberglass antennas
301135 - Wilson Cellular Dual-Band Directional Panel Antenna (for interior use)
301135 - Wilson Cellular Dual-Band Directional Panel Antenna (for interior use)
Your Price: $94.95
301135 - Wilson Cellular Dual-Band Directional Panel Antenna (for interior use)
Dual-band panel antenna for use as interior antenna in Amplifier/Repeater/BDA Systems.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
859902WPS-KIT - Lightning Surge Protector/Arrester KIT - Cable and Ground Wire Included
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
859902WPS-KIT - Lightning Surge Protector/Arrester KIT - Cable and Ground Wire Included
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
951108 - 20' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Your Price: $51.95
951108 - 20' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
951105 - 30' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Your Price: $74.95
951105 - 30' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
951106 - 50' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Your Price: $99.95
951106 - 50' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
951117 - 75' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Your Price: $139.95
951117 - 75' Extension Cable - Wilson 400 Ultra Low Loss Coax*
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
951107 - 100' Extension Cable -Wilson 400 Ultra Low Loss Coax*
Your Price: $179.95
951107 - 100' Extension Cable -Wilson 400 Ultra Low Loss Coax*
Ultra low loss cable for runs over 20'. Finished cable with N/Male ends.
Add On Interior Antenna Kit for Repeater Systems
Add On Interior Antenna Kit for Repeater Systems
Your Price: $219.95
Add On Interior Antenna Kit for Repeater Systems
Add on interior antenna kit allows you to add a second interior antenna to most repeater systems. Kit includes 2 pre-terminated cables, splitter, and interior antenna
859928 - 1900MHz 2-Way Splitter
Your Price: See Wilson 859957 Two Way Splitter
859928 - 1900MHz 2-Way Splitter
Allows you to drive two interior antennas (up to 4 using multiple splitters) with a single amplifier/repeater

841365 - Wilson Cellular Complete Building Amplifier/Repeater System for 1900Mhz PCS