|
|
Home > Cell Phone Amplifiers > 841263 - Wilson Cellular SignalBoost In-Building Wireless Cellular Amplifier Kit SIGNALBOOST™ DB Pro
841263 - Wilson Cellular SignalBoost In-Building Wireless Cellular Amplifier Kit SIGNALBOOST™ DB Pro
|
IN STOCK
Item Number: 841263
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 841263
Dual-Band Cellular/PCS Wireless Repeater designed for desktop use. Kit includes mounting hardware, Exterior antenna, Interior antenna, and cables. (Wilson 841263)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
The SIGNALBOOST™ DB Pro cellular amplifier kit significantly improves the performance of
any cellular device on any network (except Nextel*) experiencing weak signal inside of buildings.
Installation simplicity without sacrificing performance highlights this product. At the center of this
kit is the DB Pro dual band amplifier with a new high gain design. An external omni directional
gain antenna with multiple mounting options eliminates researching cell site locations and antenna
pointing. The inside panel antenna which rebroadcasts the amplified signal is designed for
optional in-wall mounting. All components are interconnected using provided standard TV cable
(RG-6) which is easily available and often found pre-installed, simplifying cable runs.
Wilson Cellular's new SignalBoost 62 dB DB PRO 841263 Cellular/PCS Amplifier works with all
cell phones and laptop data cards except iDEN, Nextel and 1700MHz AWS (T-Mobile
US 3G).
The Wilson Cellular
841263 SignalBoost DB Pro Desktop Amplifier is designed to provide coverage up to
15 ft from the unit. For increased coverage try the
YX510-PCS-CEL
which covers up to 2,500 sq. ft or the
DA4KSBR-50U (DA4000SBR-50U)
which covers up to 5,000 sq. ft.
Improve cell phone and data card performance in your home or office -
anywhere you need a stronger signal indoors!
- Works with all cell phones except iDEN/Nextel and 1700MHz AWS (T-Mobile
US 3G)
- Covers up to 15 ft away from unit
- Works with all US cellular and PCS carriers
- Oscillation protection
- Extends cell phone battery life
- Comes with everything you need - plug and play
- Made in the USA
- Up to 10 times more powerful than your cell phone
The 841263 kit includes:
- Wilson Cellular's new SignalBoost 62 dB DB PRO 801262 Cellular/PCS
Amplifier
- Wilson's new external yagi (directional) antenna (304475)
- Internal Panel Antenna (301155)
- 20', 30', and 50' lengths of RG-6 cable
Features:
- Wireless operation
- Works on all generations of CDMA, TDMA and GSM
- For 800MHz (850MHz) Cellular and
1900MHz PCS bands
- Supports multiple phones, data
cards simultaneously
- Attractive, sleek design
- Automatic overload/oscillation
protection
|
Includes:
- All mounting hardware
- AC power supply
- Installation Guide
- Receiver sensitivity -108dBm,
CDMA FER 1/2%
- Up to 2 watts power amplifier
- FCC and IC type accepted
|
|
841263 Specifications |
| Part Number |
841263 |
| Frequency |
824-894MHz, 1850-1990MHz |
| Gain |
60dB / 60dB (65 dB Maximum) |
| Power Output |
33.2 dBm (800 MHz) 34.0 dBm (1900 MHz) |
| Impedance |
75 Ohms |
| Noise Figure |
3.5dB Nominal |
| Isolation |
> 90dB |
| Power Requirements |
110-240 V AC, 50-60 Hz, 8 W |
| Connectors |
F/Female (inside antenna)
F/Female (outside antenna) |
| Dimensions |
6.2" x 4.2" x 1.5" |
| Weight |
0.64lb |
The Wilson Cellular
841263 SignalBoost DB
Pro Desktop Amplifier is designed to provide coverage up to 15 ft from the unit. For increased coverage try the YX510-PCS-CEL
which covers up to 2,500 sq. ft or the DA4KSBR-50U (DA4000SBR-50U)
which covers up to 5,000 sq. ft.
Wilson Cellular 841263 SignalBoost DB Pro Desktop Amplifier Instructions (PDF)
Optional Accessories for the Wilson Cellular 841263 SignalBoost
DB Pro
The following Wireless Extenders zBoost accessories are compatible with the
SignalBoost DB Kit:
Cable Notes:
Please note that the Wilson 841263 Signalboost uses 75 ohm cable
between the exterior antenna and base unit, not standard 50 ohm cellular cable
therefore our standard extensions are not compatible. For additional cabling,
you can use high grade RG-6 cable.
|
Configurable complete cellular amp (cell phone repeater) system for 806-866MHz iDEN (Nextel, Southern LINC, Mike). Not for 800MHz Cellular, 1700MHz AWS (T-Mobile US 3G), 1900MHz PCS
|
List Price: $749.95
Your Price: $599.95
You Save: $150.00 (20 %)
Cellular Amp System compatible with all cellular and PCS carriers in the USA and Canada. (DA4000SBR - 50U)
|
Configurable complete cellular amp (cell phone repeater) system for 800MHz Cellular. Not for Nextel/iDEN, PCS or 1700MHz AWS (T-Mobile US 3G)
50dB (801105), 55dB (CM800/55), 65dB (801165) and 65dB (CM800/65) amplifiers are all in stock.
|
Configurable complete cellular amp system for 1900MHz PCS. Not for Nextel/iDEN, 800MHz Cellular or 1700MHz AWS (T-Mobile US 3G)
|
Configurable complete dual-band repeater system for 800MHz Cellular and 1900MHz PCS. Not for Nextel/iDEN or 1700MHz AWS (T-Mobile US 3G).
|
|
|
|
Outdoor antenna upgrade kit increases the coverage area of the YX510-PCS-CEL and Wilson 801247 Signalboost DT repeater kit.
|
|
|
Optional exterior cable allowing a longer run between the exterior antenna and Wi-Ex zBoost unit. Our higher grade RG-11 cabling provides less than 2/3rds the signal loss of the standard RG-6 cabling.
|
|
|
|
|
|
|
|
|
Your Price: No longer available
1.5A Power Supply for 6VDC Wilson Dual-Band SOHO Amplifier (801247)
DISCONTINUED: No longer available
|
|
| |
841263 - Wilson Cellular SignalBoost In-Building Wireless Cellular Amplifier Kit SIGNALBOOST™ DB Pro
|
|