| | |
|
| |
| | |
|
|
Home > Cell Phone Amplifiers > 841262 - Wilson Cellular SignalBoost In-Building Wireless Cellular Amplifier Kit SIGNALBOOST™ DB Pro
841262 - Wilson Cellular SignalBoost In-Building Wireless Cellular Amplifier Kit SIGNALBOOST™ DB Pro
|
List Price: $499.95
Your Price: $389.95
You Save: $110.00 (22 %)
IN STOCK
Item Number: 841262
Manufacturer: Wilson Electronics
Manufacturer Part No: 841262
Powerful Kit! Comes Complete with Everything! Needed!
Dual-Band Cellular/PCS Wireless Repeater designed for desktop use. Kit includes mounting hardware, Exterior antenna, Interior antenna, and cables.
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
The SIGNALBOOST™ DB PRO Amplifier Kit (841262) significantly improves the performance of any cellular device on any network (except Nextel*) experiencing weak signal inside of buildings. Installation simplicity without sacrificing performance highlights this product. At the center of this kit is the DB Pro dual band amplifier with a new high gain design. An external omni directional gain antenna with multiple mounting options eliminates researching cell site locations and antenna pointing. The inside panel antenna which rebroadcasts the amplified signal is designed for optional in-wall mounting. All components are interconnected using provided standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs.
Wilson Cellular's SignalBoost 62 dB DB PRO 801262 Cellular/PCS Amplifier works with all cell phones and laptop data cards except iDEN, Nextel and 1700MHz AWS (T-Mobile US 3G).
Improve cell phone and data card performance in your home or office - anywhere you need a stronger signal indoors!
- Works with all cell phones except iDEN/Nextel and 1700MHz AWS (T-Mobile US 3G)
- Covers up to 15 ft away from unit
- Works with all US cellular and PCS carriers
- Oscillation protection
- Extends cell phone battery life
- Comes with everything you need - plug and play
- Made in the USA
- Up to 10 times more powerful than your cell phone
The 841262 kit includes:
- Wilson Cellular's new SignalBoost 62 dB DB PRO 801262 Cellular/PCS Amplifier
- Wilson's external omni-directional antenna (301201)
- Internal Panel Antenna (301155)
- 20', 30', and 50' lengths of RG-6 cable
Features:
- Wireless operation
- Works on all generations of CDMA, TDMA and GSM
- For 800MHz (850MHz) Cellular and 1900MHz PCS bands
- Supports multiple phones, data cards simultaneously
- Attractive, sleek design
- Automatic overload/oscillation protection
|
Includes:
- All mounting hardware
- AC power supply
- Installation Guide
- Receiver sensitivity -108dBm, CDMA FER 1/2%
- Up to 2 watts power amplifier
- FCC and IC type accepted
|
|
801262 Specifications
|
| Part Number
|
801262
|
| Frequency
|
824-894MHz, 1850-1990MHz
|
| Gain
|
62 dB / 62 dB
|
| Power Output
|
2.5 watts
|
| Impedance
|
75 Ohms
|
| Noise Figure
|
3.5dB Nominal
|
| Isolation
|
> 90dB
|
| Power Requirements
|
110-240 V AC, 50-60 Hz, 8 W
|
| Connectors
|
F/Female (inside antenna)
F/Female (outside antenna)
|
| Dimensions
|
6.2" x 4.2" x 1.5"
|
| Weight
|
0.64lb
|
Wilson Cellular 801262 SignalBoost DB Pro Desktop Amplifier Instructions (PDF)
Optional Accessories for the Wilson Cellular 801262 SignalBoost DB Pro
The following Wireless Extenders zBoost accessories are compatible with the SignalBoost DB Kit:
Cable Notes:
Please note that the Wilson 801262 Signalboost uses 75 ohm cable between the exterior antenna and base unit, not standard 50 ohm cellular cable therefore our standard extensions are not compatible. For additional cabling, you can use high grade RG-6 cable. |
List Price: $499.95
Your Price: $389.95
You Save: $110.00 (22 %)
Dual-Band Cellular/PCS Wireless Repeater designed for desktop use. Kit includes mounting hardware, Exterior antenna, Interior antenna, and cables. (Wilson 841263)
|
|
|
|
|
|
|
841262 - Wilson Cellular SignalBoost In-Building Wireless Cellular Amplifier Kit SIGNALBOOST™ DB Pro
|
|