|
|
Home > Cell Phone Amplifiers > 844006 - Wilson Cellular Complete Building Amplifier/Repeater System for 806-866MHz iDEN (Nextel, Southern LINC, Mike)
844006 - Wilson Cellular Complete Building Amplifier/Repeater System for 806-866MHz iDEN (Nextel, Southern LINC, Mike)
|
List Price: $1,099.95
Your Price: $799.95
You Save: $300.00 (27 %)
IN STOCK
Item Number: 844006
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 844006
Complete cellular amp (cell phone repeater) kit for 800MHz iDEN (Nextel. Southern LINC, Mike)
60dB (804006), Yagi and panel antenna plus 1 - 30' and 1 - 50' Wilson-400 cable assemblies. Ready to Plug and Play!
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
Personalization
* denotes required field
Antenna Mount*
Lightning Protector*
Phone models used?
(If an adapter is available we will include adapter and Yagi test adapter to help aim Yagi)
Zip code where system is to be used:*
Carriers system will be used with:*
|
Wilson Cellular's new series of Smart Technology In-Building Cell Phone Amplifiers (cell phone repeaters) offer exceptional performance without causing harmful interference to the cell site.
The new 844006 iDEN (806-866 MHz) Wilson cellular repeater kits are in stock for immediate purchase.
|
Wilson Cellular Smart Technology Amplifier Features:
-
Greater than 60dB (804006) computer controlled adjustable AGC dynamic range
-
Automatic Gain Adjusting in the event of oscillation or overload
-
10dB Gain Steps 30-60dB (804006)
-
Automatic shutdown on overload
-
Uplink squelch - optional
-
TIA/EIA-98-E 3.5.1 Receiver Sensitivity better than -110dBm
-
CDMA/rho > 0.912
-
LED Indicators for Power, Oscillation and AGC
-
3 Watts Max Output Power
-
+30dBm Linear Output Power
-
+30dBm Max RF up/down
Installation Guide Addendum (PDF) |
Compatibility:
- Compatible with iDEN Carriers (Nextel, Southern LINC, Mike). Compatible with iDEN Cellular calls and Direct Connect.
- Not compatible with 800MHz Cellular (Verizon, AT&T, etc), 1700MHz AWS (T-Mobile US 3G) or 1900MHz PCS (AT&T GSM, Sprint PCS, T-Mobile, Qwest)
- Nextel Rebanding note: Due to interference between the Nextel 800MHz band and the Public Safety 800MHz band, Nextel will be moving their service to the 900MHz band. What this means is that at some point your 800MHz repeater will need to be replaced with a 900MHz repeater. More (PDF)
|
|
Need custom cables?
We can custom build the cables to your required length using either LMR-400 or lower loss LMR-600. Contact us at (877) 594-5766 for more information. |
Zip Code/Carrier Name: We require you to provide us with your carrier's name and the zip code where the system is to be used so that we can check system compatibility.
Note regarding 60dB amplifier: If you intend to purchase the 60dB amplifier
or higher, please ensure that you have at least 70' of cable in your system to allow for adequate antenna separation and do not use if you have 'full' signal outside.
The Wilson 844006 Building Cell Phone Repeater Package Contents:
Does not include pole/mast for mounting Yagi - see FMW4-YMST4: Antenex 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Wilson Cellular Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifiers reduce problems with signal fades and dropped calls while improving voice quality, service range and access. These multi-mode amplifiers are designed to offer a cost-effective solution for use in buildings. Wilson Cellular amplifiers are network compatible and enhance the cellular phone user's satisfaction without comprising the operation of the cellular system.
This Amplifier-Repeater greatly improves signal strength inside a building when using your cellular phone. It does this without a physical connection to your phone, allowing you to walk freely during a call. It even allows multiple phones to be used simultaneously.
The signal from the cellular tower is received by the outside antenna and then amplifier and repeated to your phone through the inside antenna. When the phone transmits it is received by the inside antenna and then amplified/repeated through the outside antenna to the cellular tower.
- Wireless operation - no physical connection to cellular phone
- In building and in vehicle models available
- Increases signal strength in buildings for 800MHz
iDEN frequencies (806-866MHz)
- Allows multiple phones to be used simultaneously
- Increases your cellular phone's range
- Low cost solution for uncompromised performance
Open area estimates: Walls will decrease coverage distance. Metal, cement and cinderblock walls will severely attenuate or stop signal penetration.
Coverage area is primarily determined by the strength of the outdoor signal and the gain of the amplifier. To determine correct amplifier size, see chart above and documents below.
Antenna Separation:
In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. The following rules will help you maintain adequate separation:
-
Ensure that the exterior Yagi antenna is aimed away from the interior dome antenna.
-
Ensure that you have 45' of separation between the interior and exterior antennas when using the 50dB Amplifier and 70' of separation between the antennas when using the 65dB amplifier
or higher. Of that, at least 20' should be vertical separation (the Yagi should
be mounted at least 20' higher than the interior panel antenna.)
How dB Affects Coverage:
A 6dB increase in signal doubles the interior coverage distance while a 6dB decrease will halve your interior coverage distance. Likewise, a 3dB increase will increase the interior coverage distance by 43% and a 3dB decrease will decrease it by 30%.
How you can increase the interior coverage distance/area (increase dB):
-
Improve the signal from the tower: 301129 Wilson Cellular Yagi antenna higher or where there are less obstructions between it and the tower.
-
Use less cable: Every 50' of Ultra Low Loss Cable loses 2dB of signal. However, in order to maintain proper separation between the interior and exterior antennas, you must maintain at least 40' to 45' of separation between antennas when using the 50dB amplifier and 75' when using the 60dB amplifier
or higher.
Additional Documentation:
Please note that while lightning protection will help guard against amplifier damage due to a lightning strike it does not guarantee it.
|
|
|
Configurable complete cellular amp (cell phone repeater) system for 806-866MHz iDEN (Nextel, Southern LINC, Mike). Not for 800MHz Cellular, 1700MHz AWS (T-Mobile US 3G), 1900MHz PCS
|
Configurable complete dual-band repeater system for 800MHz Cellular and 1900MHz PCS. Not for Nextel/iDEN or 1700MHz AWS (T-Mobile US 3G).
|
Add on interior antenna kit allows you to add a second interior antenna to most repeater systems. Kit includes 2 pre-terminated cables, splitter, and interior antenna
|
|
|
Your Price: No longer available
HIGH POWER 5 Watt 806-866 MHz iDEN/Nextel Wilson inline amplifier for use with Nextel,Southern LINC and Mike phones, cellular data cards, wireless cellular modems and other cellular devices (Wilson 814021).
DISCONTINUED: No longer available
|
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
| |
844006 - Wilson Cellular Complete Building Amplifier/Repeater System for 806-866MHz iDEN (Nextel, Southern LINC, Mike)
|
|