|
|
814001 - Wilson Cellular Nextel/iDEN 3 Watt Direct Connection Amplifier
|
IN STOCK
Item Number: 814001
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 814001
Direct connect 3 Watt 806-866 MHz iDEN/Nextel Wilson inline amplifier for use with Nextel,Southern LINC and Mike phones, cellular data cards, wireless cellular modems and other cellular devices (Wilson 814001).
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
Features:
- Maximum 3 Watts Output Power on iDEN (Nextel,
Southern LINC, Mike) Frequencies (806MHz-866MHz)
- Power Control Logic ensures Maximum Output Power is within iDEN Standards
- Automatic Gain Control
- Can be Used in a Fixed or Mobile Application
- FCC and IC Type Accepted
|
|
Key Notes:
|
The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies
iDEN (Nextel, Southern LINC, Mike) signals providing up to 3 Watts of output power. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)
Works with all iDEN (Nextel/Southern LINC/Mike)
providers. Not compatible with 800MHz Cellular or 1900MHz providers.
How the unit functions:
The 800MHz iDEN signal from the cell site is received by the
Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the
Wilson Cellular phone adapter cable
(sold separately). When the phone transmits, the signal is sent to the amplifier
through the adapter and then amplified and sent to the cell site through the
outside antenna.
Compatible with:
Nextel, Southern LINC, Mike. Not compatible with Cellular/PCS
carriers such as AT&T, Verizon, Alltel, US Cellular, Midwest Wireless, Sprint PCS, T-Mobile, Qwest,
etc
Cellular/PCS users should use the
811201 - Wilson Cellular
800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier
Nextel Rebanding note: Due to interference between the Nextel 800MHz band and the Public Safety 800MHz band, Nextel will be moving their service to the 900MHz band. What this means is that at some point your 800MHz
amplifier will need to be replaced with a 900MHz amplifier.
Ideal for use with car kits requiring an external antenna.
Most Motorola full install car kits will require an
FME/Male to Mini UHF/Male
adapter for use.
Includes:
Requires (not included):
-
External Antenna with FME Female connection (Wilson Cellular Antenna)
-
Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.
Optional Accessories (not included):
Catalog Page (PDF)
|
Specifications |
| Part Number |
|
814001 |
| Frequency |
|
806-866MHz |
| Gain (up/down) |
|
Cell Site Controlled
Max 10/10 |
| Linear Output Power |
|
+30dBm |
| Max Output Power |
|
3 Watts |
| Max RF (up/down) |
|
+35dBm/+15dBm, |
| Noise Figure (down) |
|
3.5dB Nominal |
| Flatness |
|
+/- 2dB |
| Isolation |
|
90dB |
| Power Consumption |
|
12V, 1.5A |
| Connectors |
|
FME Male, 50 Ohms |
| Dimensions |
|
5.5 * 4.3 * 1.4 (inch) |
| Weight |
|
1.32 lbs |
|
|
|
|
Powerful cell phone antenna, requires NMO mount. Typically installed through-the-roof.
Compatible with iDEN (Nextel, SouthernLINC, Mike)
|
|
|
|
|
|
|
|
|
| |
Product Reviews
814001 - Wilson Cellular Nextel/iDEN 3 Watt Direct Connection Amplifier
|
|