|
|
812201 - Wilson Cellular 800MHz/1900MHz Dual-Band GSM/TDMA 3 Watt Direct Connection Amplifier
|
IN STOCK
Item Number: 812201
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 812201
Compatible with GSM/TDMA Cellular/PCS Carriers and GSM, TDMA, GPRS, EDGE, HSDPA technologies only, for example: Cingular, T-Mobile (850MHz, 1900MHz).
NOT COMPATIBLE WITH CDMA, FOR EXAMPLE: VERIZON, SPRINT, ALLTEL, US CELLULAR
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
Personalization
* denotes required field
I understand that this product is only compatible with GSM/TDMA carriers and phones.*
|
Compatible with all US GSM/TDMA
Service Providers (for example, Cingular, T-Mobile) and GSM, TDMA, GPRS, EDGE, HSDPA technologies only,
not compatible with CDMA (Verizon, Sprint PCS, Alltel, US
Cellular, Midwest Wireless, etc) or iDEN (Nextel/Southern LINC/Mike). CDMA users
should use the
811201 inline amplifier.
What is the difference between
the 812201 and 811201? The
811201 dual-band inline amplifier contains additional electronics required
for proper signal power management that is required for CDMA technology but not
for GSM/TDMA/GRPS/EDGE/HSDPA technology. The 812201 dual-band inline amplifier does not contain
the additional electronics and is therefore less expensive (but not compatible
with CDMA).
Features:
- Maximum 3 Watts Output Power on 800MHz
- Maximum 2 Watts Output Power on 1900MHz
- Compatible with GSM/TDMA Carriers and technology
- Not Compatible with 1700MHz AWS (T-Mobile US 3G)
- NOT COMPATIBLE WITH CDMA or iDEN
- Power Control Logic ensures Maximum Output Power is within Cellular Standards
- Automatic Gain Control
- Can be Used in a Fixed or Mobile Application
- FCC Type Accepted
|
|
Key Notes:
|
The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies both 800MHz and 1900MHz cellular and PCS signals providing up to 3 Watts of output power on the 800MHz band and 2 Watts of output power on the 1900MHz (PCS) Band. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)
Compatible with all US GSM/TDMA
Service Providers (for example, Cingular, T-Mobile), not compatible with CDMA
(Verizon, Sprint PCS, Alltel, US Cellular, Midwest Wireless, etc) or iDEN (Nextel/Southern LINC/Mike).
CDMA users should use the
811201 inline amplifier. Not Compatible with 1700MHz AWS (T-Mobile US 3G).
How the unit functions:
The 800MHz and 1900MHz cellular signal from the cell site is received by the
Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the
Wilson Cellular phone adapter cable (sold separately). When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna.
Compatible with:
All US GSM/TDMA Cellular/PCS
carriers. Not compatible with CDMA carriers (use
811201 dual-band inline amplifier) or iDEN carriers such as Nextel, SouthernLinc, Mike (Canada). iDEN users should use the 3 Watt Direct Connection Amplifier for Nextel/iDEN. Not Compatible with 1700MHz AWS (T-Mobile US 3G).
Ideal for use with car kits requiring an external antenna. Adapter may be required to connect to your particular car kit.
Includes:
Requires (not included):
-
External Antenna with FME Female connection (Wilson Cellular Antenna)
-
Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.
Optional Accessories (not included):
|
Specifications |
| Part Number |
|
812201 |
| Frequency |
|
824-894MHz
1850-1990MHz |
| Gain (up/down) |
|
Max 10 dB / 14 dB |
| Max Output Power |
|
3 Watts |
| Max RF (up/down) |
|
+15dBm |
| Noise Figure (down) |
|
3.5dB Nominal |
| Flatness |
|
± 2 dB / ±2 dB |
| Isolation |
|
90dB |
| Power Consumption |
|
12 V, 0.5-1.5 A max |
| Connectors |
|
FME Male, 50 Ohms |
| Dimensions |
|
5.5 * 4.3 * 1.4 (inch) |
| Weight |
|
1.32 lbs |
|
|
|
Our most popular dual-band cell phone antenna, works great on passenger cars and trucks.
Compatible with all generations of CDMA, GSM and TDMA including GSM, 3G GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
|
List Price: $69.95
Your Price: $59.95
You Save: $10.00 (14%)
Cell phone antenna which works great on Trucks, Homes, RVs, Boats and Buildings.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
|
|
List Price: $389.95
Your Price: $349.95
You Save: $40.00 (10%)
Dual-Band Cellular/PCS 40 dB Wireless Mobile Amplifier. 3 Watts of output power without a physical connection to the cell phone enhancing multiple cell phones or cellular data cards simultaneously (Wilson 801201)
|
|
|
|
|
|
|
|
|
|
|
Product Reviews
812201 - Wilson Cellular 800MHz/1900MHz Dual-Band GSM/TDMA 3 Watt Direct Connection Amplifier
|
|