|
|
811101 - Wilson Cellular 800MHz Single Band 3 Watt Direct Connection Amplifier
|
IN STOCK
Item Number: 811101
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 811101
Direct Connect 3 Watt Single-Band (Cellular 800MHz) Inline Cellular Signal Booster for cell phones, cellular data cards, wireless cellular modems and other cellular devices. Not for iDEN (Nextel, Southern LINC, Mike) (Wilson Cellular 811101)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
This is a single-band 800MHz amplifier. Dual-Band or 1900MHz users/carriers should use the
811201 - Wilson Cellular
800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier
Features:
- Maximum 3 Watts Output Power on 800MHz.
Allows full benefit of Outside Antenna on 1900MHz
- Passes TIA/EIA-98-E transmit tests for evaluating CDMA Cellular Phones
- Power Control Logic ensures Maximum Output Power is within Cellular Standards
- Automatic Gain Control
- Can be Used in a Fixed or Mobile Application
- FCC Type Accepted
|
|
Key Notes:
|
The Direct Connect (inline) Bi-directional Amplifier improves RF coverage in areas with no signal or low signal strength. The unit amplifies 800MHz
AMPS, TDMA, CDMA and GSM signals and passes through 1900MHz PCS signals providing up to 3 Watts of output power on the 800MHz band. Increases your phone's coverage up to 50 miles or more (under ideal conditions.)
Works with all 800MHz Cellular Service Providers except iDEN (Nextel/Southern LINC/Mike).
Not recommended for 1900MHz PCS Carriers.
How the unit functions:
The 800MHz cellular signal from the cell site is received by the
Wilson Cellular antenna (sold separately). The signal is then amplified and transmitted to your phone through the
Wilson Cellular phone adapter cable (sold separately). When the phone transmits, the signal is sent to the amplifier through the adapter and then amplified and sent to the cell site through the outside antenna.
1900MHz PCS signals gain the benefit of the antenna but are not amplified.
Compatible with:
Recommended for Verizon, Alltel, US Cellular, Midwest Wireless and other 800MHz
cellular carriers. Not recommended for Sprint PCS, T-Mobile, Qwest or AT&T GSM
users.
Dual-Band or 1900MHz users/carriers should use the
811201 - Wilson Cellular
800MHz/1900MHz Dual-Band 3 Watt Direct Connection Amplifier
Ideal for use with car kits requiring an external antenna. Adapter may be required to connect to your particular car kit.
Includes:
Requires (not included):
-
External Antenna with FME Female connection (Wilson Cellular Antenna)
-
Phone Specific Antenna Adapter with FME Male connection to connect directly to your phone. With appropriate adapter may be connected to most full install car kits which support an external antenna.
Optional Accessories (not included):
Catalog Page (PDF)
|
Specifications |
| Part Number |
|
811101 |
| Frequency |
|
824-894MHz (Amplified)
1850-1990MHz
(Passthrough) |
| Gain (up/down) |
|
Max 10 dB / 14 dB |
| Max Output Power |
|
3 Watts |
| Max RF (up/down) |
|
+15dBm |
| Noise Figure (down) |
|
3.5dB Nominal |
| Flatness |
|
± 2 dB / ±2 dB |
| Isolation |
|
90dB |
| Power Consumption |
|
12 V, 0.5-1.5 A max |
| Connectors |
|
FME Male, 50 Ohms |
| Dimensions |
|
5.5 * 4.3 * 1.4 (inch) |
| Weight |
|
1.32 lbs |
|
Product Reviews
811101 - Wilson Cellular 800MHz Single Band 3 Watt Direct Connection Amplifier
|
|