Search
Browse by Manufacturer
Browse Categories
Shopping Cart
Your cart is empty.




McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams



802770 - Wilson Tri-Band 4G-C Cellular/PCS and AWS 850/1900/1700/2100 MHz

Your Price: $899.95
Item Number: 802770
Manufacturer: Wilson Electronics
Manufacturer Part No: 802770
In-Building Wireless Tri-Band Cell/PCS/AWS 850/1900/1710-1755 / 2110-2155 MHz Amplifier/Repeater suitable for a residential, SOHO or small business application with weak outside signal

Cell phone antennas and amplifiers are frequency specific (more info).

Features:

  • High gain, low noise
  • Standard N/female connectors
  • Osciallation warning light
  • AC power supply included
  • Low operating temperature
  • 2yr manufacturer warranty

Requires:

Optional:

Compatibility:

  • Compatible with all Cellular/PCS Carriers that operate on the AWS spectrum (1710-1755 - 2110-2155 MHz)(GSM/GPRS, CDMA, TDMA, AMPS/Analog), and Cellular/PCS on 850 and 1900 MHz. 
  • Not compatible with iDEN (Nextel, Southern LINC, Mike)
  • Compatible with 1700MHz AWS (T-Mobile US 3G)

Please note that many carriers (Verizon, AT&T, Alltel, US Cellular and others operate on 800MHz Cellular, 1900MHz PCS or both depending upon your location. CheckZip can be used to determine which frequencies are licensed by your carrier in your area.

Complete Kits:

The Wilson Full AWS 70dB In-Building Repeater is also available as part of the following complete repeater kits:

   
About the Wilson Tri-Band 4G-C :

The Wilson Tri-Band 4g-C 802770 provides completely wireless boosting of signals for multiple users simultaneously. It supports all cellphone handsets and service providers in the Cellular/PCS/AWS frequency bands, and is perfect for use in office enterprises, large vehicles (ships, trains, buses), or homes with multiple users. A cellphone can be boosted as far as 200 feet away. A sophisticated Protection circuit also prevents damage to the amplifier due to interference or improper installation.

With a Wilson Tri-Band 4g-C 802770 amplifier doing all the long-range work, the battery on your cell phone drains much more slowly which increases your talk time. Finally, with proper use of the Wilson Tri-Band 4g-C 802770, dangerous hot spots are removed a safe distance from the user's body.

Important Information Regarding Coverage:

  • Coverage is dependent upon the strength of the signal received from the tower at the outside antenna. At the location that the outside antenna is mounted a signal strength of at least 3 bars is required. Use of a high-gain directional antenna for the outside antenna improves coverage area.

How the unit functions:

The 850-1900-1710-1755 / 2110-2155 MHz cellular signal from the cell site is received by the Outside antenna (not included). The signal is then amplified and transmitted to your phone through the inside antenna. When the phone transmits, the signal is sent to the amplifier through the inside antenna and then amplified and sent to the cell site through the outside antenna.

Compatible with:

All carriers that utilize the 850/1900 and 1700MHz AWS spectrum(T-Mobile US 3G). p>

Installation:

In order for your system to function properly, you must maintain adequate separation between the interior and exterior antennas. This amplifier requires a minimum of 20' of separation between the outside and inside antennas. If a directional antenna is used for either the inside or outside antenna, ensure that it is not pointed at the other antenna.
 
Installation Documents:

 
Wilson Tri-Band 4g-C 802770 Amplifier Specifications
Frequency 850-1900/1710-1755 / 2110-2155 MHz
Standard Supported Cellular, PCS, AWS
Gain 70dB
Max Output Power 3 Watts EIRP
Impedance 50ohms
Noise Figure 3.5 dB
VSWR Less than 2:1
AC Power
Transformer
Input AC 110V, 60Hz;
Output: DC 6V
DC Power
(Optional)
12V/6V
RF Connections Inside/Outside Antenna Port: N/Female
Power Consumption <10W
Warranty 2 year
Approvals
FCC ID FCC ID: PWO272770
IC Approved Canada IC: PENDING

Related Products

JPIPE: Universal Antenna J-Pipe Mount
JPIPE: Universal Antenna J-Pipe Mount (Regular)
Your Price: $29.95
JPIPE: Universal Antenna J-Pipe Mount (Regular)
Used to roof/wall mount yagi (up to 40") and panel antennas
YMW4-YMST4: Antenex 4' x 1-1/4
FMW4-YMST4: Antenex (Laird Technologies) 4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Your Price: $89.95
FMW4-YMST4: Antenex (Laird Technologies)  4' x 1-1/4" Aluminum Mast and 4" Standoff Wall Mounts (2 Brackets)
Includes 4' mast and two standoff wall mount brackets. Idea for pole mounted Yagi and Fiberglass antennas
859902WPS-KIT - Lightning Surge Protector/Arrester KIT - Cable and Ground Wire Included
List Price: $149.95
Your Price: $129.95
You Save: $20.00 (13 %)
859902WPS-KIT - Lightning Surge Protector/Arrester KIT - Cable and Ground Wire Included
Protects amplifier from surges resulting from outside antenna being struck by lightning. Includes Ground Wire, Coax jumper and three different types of grounding devices.
CM222W - Dual-Band Ceiling Mount Omni-Directional Dome Antenna (for interior use)
CM222W - Full Band Dome Antenna (3dB) includes mounting kit 700 - 2700 MHz
Your Price: $59.95
CM222W - Full Band Dome Antenna (3dB) includes mounting kit 700 - 2700 MHz
Full Band Dome Antenna (3dB) includes mounting kit 700 - 2700 MHz. (Cell Phone Mate CM222W)
M54 - Dual-Band Cellular/PCS Fiberglass Base Station Antenna (Includes Pole Mounting Brackets)
CM100-L - Dual-Band Cellular/PCS 9dB Omni Directional Fiberglass Base Station Antenna (Includes Mounting Brackets)
Your Price: $139.95
CM100-L - Dual-Band Cellular/PCS 9dB Omni Directional Fiberglass Base Station Antenna (Includes Mounting Brackets)
Durable fiberglass dual band Cellular/PCS omni-directional 9 dB antenna. Includes aluminum riser and Pole mounting hardware brackets. Designed for use a donor antenna in Amplifier/Repeater applications. (Cell Phone Mate CM100-L)

802770 - Wilson Tri-Band 4G-C Cellular/PCS and AWS 850/1900/1700/2100 MHz