| | |
|
| |
| | |
|
|
801262 - Wilson Cellular In-Building Wireless signalboost™DB Pro™ (Amplifier Only)
|
List Price: $499.95
Your Price: $249.95
You Save: $250.00 (50 %)
IN STOCK
Item Number: 801262
Manufacturer: Wilson Electronics
Manufacturer Part No: 801262
Dual-Band Cellular/PCS Wireless Repeater designed for desktop use. Kit includes mounting hardware. (Wilson 801262)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
The SIGNALBOOST™ DB Pro cellular amplifier kit significantly improves the performance of any cellular device on any network (except Nextel*) experiencing weak signal inside of buildings. Installation simplicity without sacrificing performance highlights this product. An optional external omni directional gain antenna with multiple mounting options eliminates researching cell site locations and antenna pointing. The optional inside panel antenna which rebroadcasts the amplified signal is designed for optional in-wall mounting. All components are interconnected using provided standard TV cable (RG-6) which is easily available and often found pre-installed, simplifying cable runs.
Wilson Cellular's new DB Pro 65 dB Adjustable Gain 800/1900MHz In-building Wireless Smart Technology II™ Signal Booster (Includes: Power Supply 859912) works with all cell phones and laptop data cards except iDEN, Nextel and 1700MHz AWS (T-Mobile US 3G).
The Wilson Cellular 801262 SignalBoost DT Pro Desktop Amplifier is designed to provide coverage up to 15 ft from the unit. For increased coverage try the YX510-PCS-CEL which covers up to 2,500 sq. ft or the DA4KSBR-50U (DA4000SBR-50U) which covers up to 5,000 sq. ft.
Improve cell phone and data card performance in your home or office - anywhere you need a stronger signal indoors!
- Works with all cell phones except iDEN/Nextel and 1700MHz AWS (T-Mobile US 3G)
- Covers up to 15 ft away from unit
- Works with all US cellular and PCS carriers
- Oscillation protection
- Extends cell phone battery life
- Comes with everything you need - plug and play
- Made in the USA
- Up to 10 times more powerful than your cell phone
Features:
- Wireless operation
- Works on all generations of CDMA, TDMA and GSM
- For 800MHz (850MHz) Cellular and 1900MHz PCS bands
- Supports multiple phones, data cards simultaneously
- Attractive, sleek design
- Automatic overload/oscillation protection
|
Includes:
- All mounting hardware
- AC power supply
- Installation Guide
- Receiver sensitivity -108dBm, CDMA FER 1/2%
- Up to 2 watts power amplifier
- FCC and IC type accepted
|
|
801262 Specifications
|
| Part Number
|
801262
|
| Frequency
|
824-894MHz, 1850-1990MHz
|
| Gain
|
60dB / 60dB (65 dB Maximum)
|
| Power Output
|
33.2 dBm (800 MHz) 34.0 dBm (1900 MHz)
|
| Impedance
|
75 Ohms
|
| Noise Figure
|
3.5dB Nominal
|
| Isolation
|
> 90dB
|
| Power Requirements
|
110-240 V AC, 50-60 Hz, 8 W
|
| Connectors
|
F/Female (inside antenna)
F/Female (outside antenna)
|
| Dimensions
|
6.2" x 4.2" x 1.5"
|
| Weight
|
0.64lb
|
The Wilson Cellular 801262 SignalBoost DB Pro Desktop Amplifier is designed to provide coverage up to 15 ft from the unit. For increased coverage try the YX510-PCS-CEL which covers up to 2,500 sq. ft or the DA4KSBR-50U (DA4000SBR-50U) which covers up to 5,000 sq. ft.
Wilson Cellular 801262 SignalBoost DT Pro Desktop Amplifier Instructions (PDF)
Optional Accessories for the Wilson Cellular 801262 SignalBoost DB Pro
The following Wireless Extenders zBoost accessories are compatible with the SignalBoost DT Kit:
Cable Notes:
Please note that the Wilson 801262 Signalboost uses 75 ohm cable between the exterior antenna and base unit, not standard 50 ohm cellular cable therefore our standard extensions are not compatible. For additional cabling, you can use high grade RG-6 cable. |
|
|
List Price: $94.95
Your Price: $49.95
You Save: $45.00 (47 %)
High gain 75 Ohm, directional Wide/Multi band cell phone antenna - for 800/850MHz Cellular and 1900MHz PCS, 800/900MHz iDEN/Nextel/SMR, Euro/Asian standard 900MHz and 1800MHz, WCDMA 2.1GHz and the 2.5GHz WiFi band.
|
|
Outdoor antenna upgrade kit increases the coverage area of the YX510-PCS-CEL and Wilson 801247 Signalboost DT repeater kit.
|
|
|
|
|
|
|
|
| | |
801262 - Wilson Cellular In-Building Wireless signalboost™DB Pro™ (Amplifier Only)
|
|