|
|
Home > Cell Phone Amplifiers > 801215 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit (Includes Cell Phone Cradle Plus)
801215 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit (Includes Cell Phone Cradle Plus)
|
IN STOCK
Item Number: 801215
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 801215
Dual-Band Cellular/PCS 40 dB Wireless Mobile Amplifier kit. 3 Watts of output power without a physical connection to the cell phone enhancing multiple cell phones or cellular data cards simultaneously. Includes Cell Phone Cradle Plus (Wilson 801215)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
This kit contains the Wilson Cellular 801201 Vehicle Repeater and the Cell Phone Cradle Plus.
Wilson Cellular In-Vehicle Amplifiers extend cellular services in poor coverage areas by amplifying both transmit and receive signals. The amplifier reduces problems with signal fades and dropped calls while improving voice quality, service range and access. Wilson Cellular amplifiers are network-compatible and enhance the cellular phone user's satisfaction without compromising the operation of the cellular system.
The kit includes Wilson's Cell Phone Cradle Plus (301146), a versatile car cradle with a built-in antenna. Using the cradle not only extends cellular range and provides better coverage, but it allows drivers to keep both hands on the wheel when using their cell phones, greatly increasing safety. The cradle can fit any cellular phone, and when the phone is docked supports any hands-free device, including ear-buds and Bluetooth products.
Features:
- Passes TIA/EIA-98-E Transmit test for evaluation CDMA Cellular Phones
- Power Control Logic ensures maximum output power is within Cellular Standards
- Allows multiple phones to be used simultaneously
- Allows cellular phone to operate properly with all types of modulations including CDMA
- Maximum 3 Watts output power
- Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA (not compatible with Nextel/iDEN).
- Not compatible with 1700MHz AWS (T-Mobile US 3G), 700MHz (Verizon 4G)
- Automatic Gain Control
- Overload Protection Circuit - Protects cell system from overload
- Automatic Reset - if overload occurs
- FCC Type Accepted
|
Application Note:
Mobile cell phone repeaters are great for use in urban areas where you are experiencing dropped calls and poor connections. For usage in rural areas where signal is worse, a direct connect (inline) cell phone amplifier will perform much better.
|
What are the benefits of Wilson Cellular Wireless Mobile Amplifiers?
The Wilson Cellular Wireless Amplifiers allow the user to benefit from an outside antenna and amplifier without a physical connection to the cell phone. This eliminates the need for an external antenna connection on the cell phone.
Note: In order to maintain improved signal, your phone must be left in cradle during usage (i.e. you must use a headset or hands free car kit.)
Wireless Cell Phone Amplifier vs Direct Connection Amplifier?
The Wilson Cellular Wireless Amplifiers and Direct Connection Cell Phone Amplifiers perform comparably in urban situations. Both amplifiers transmit up to 3 Watts of power to the cell site and receive a signal as weak as -110dBm. For rural applications, the Direct Connect (inline) Cell Phone Amplifier will perform better and is recommended.
Does the Wilson Cellular Wireless Mobile Amplifier affect a carrier's cell site?
Wilson Cellular's Wireless Mobile Amplifiers have Smart Technology that automatically adjusts the power based upon the cell site's requirements. This patent pending technology ensures that the power to the cell site is within the carrier's specifications.
Includes:
Requires Exterior Cell Phone Antenna:
Wilson Electronics offers the 801201 amplifier in a number of different packages to fit your needs. Click on the amplifier package below that is right for you:
Notes:
- The 801201 Mobile Cell Phone Repeater uses different power supplies than the previous amplifiers. You can not use the older power supplies 859903, 859904 or 859905.
Compatibility:
- Compatible with all 800MHz Cellular and 1900MHz PCS providers (CDMA, TDMA, GSM, Analog). For example, Verizon, Cingular, Alltel, US Cellular, Midwest Wireless, Cellular One, Western Wireless, Sprint PCS, T-Mobile, Qwest and many more
- Not compatible with iDEN (Nextel, Southern LINC, Mike)
- Not compatible with 1700MHz AWS (T-Mobile US 3G), 700MHz (Verizon 4G)
801201 Mobile Cell Phone Repeater Catalog Page (PDF)
801201 Mobile Cell Phone Repeater Flyer / Amplifier Comparison (PDF)
801201 Mobile Cell Phone Repeater Installation Guide (PDF)
|
Specifications
|
| Part Number
|
801215
|
| Frequency
|
824-894MHz,
1850-1990MHz
|
| Gain (up/down)
|
40dB / 45dB
|
| Max Output Power
|
3 Watts (Cell Site Controlled)
|
| Max RF (downlink)
|
+10dBm
|
| Noise Figure (down)
|
3.5 dB Nominal
|
| Flatness
|
±3 dB / ±4 dB
|
| Isolation
|
> 90dB
|
| Power Consumption
|
6V, 3 A max (subject to Uplink Power)
|
| Connectors
|
FME Male, 50 Ohms
|
| Dimensions
|
4.5 * 3.5 * 1.25 (inch)
|
| Weight
|
1.5 lbs
|
NOTICE TO DRIVERS IN CALIFORNIA AND MINNESOTA: State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other dashboard or friction mounting options should be used. Wpsantennas.com does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71) |
List Price: $269.95
Your Price: $219.95
You Save: $50.00 (19 %)
High performance, value priced dual-band wireless vehicle repeater and antenna package. Includes Cellphone Mate CM2000WL-40 dual-band vehicle repeater, interior antenna, AC & DC power supplies and a magnetic antenna.
|
List Price: $499.95
Your Price: $249.95
You Save: $250.00 (50 %)
Dual-Band Cellular/PCS Wireless Mobile Amplifier kit. 3 Watts of output power without a physical connection to the cell phone enhancing multiple cell phones or cellular data cards simultaneously. Includes both interior and exterior antennas (DA4KMR-10A)
|
|
Low profile, multiple uses: hotel room, vehicle, interior cell phone antenna for repeater systems.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel
|
|
|
|
|
List Price: $44.95
Your Price: No longer available
Dual-band magnetic mount antenna, works great on passenger cars and trucks.
Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS
| |
801215 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit (Includes Cell Phone Cradle Plus)
|
|