|
|
Home > Cell Phone Amplifiers > 801212 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit (Includes Magnetic Mount Antenna)
801212 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit (Includes Magnetic Mount Antenna)
|
List Price: $429.95
Your Price: $389.95
You Save: $40.00 (9%)
IN STOCK
Item Number: 801212
Manufacturer: Wilson Cellular / Wilson Electronics
Manufacturer Part No: 801212
Dual-Band Cellular/PCS 40 dB Wireless Mobile Amplifier kit. 3 Watts of output power w/o a physical connection to the cell phone enhancing multiple cell phones or cellular data cards simultaneously. Includes Magnetic Mount 301103 antenna. (Wilson 801212)
| Cell phone antennas and amplifiers are frequency specific
(more info). |
|
This kit contains both the
Wilson Cellular 801201 Vehicle Repeater as well
as the
301103 Magnetic Mount Antenna
- everything you need.
Wilson Cellular In-Vehicle Amplifiers extend
cellular services in poor coverage areas by amplifying both transmit and receive
signals. The amplifier reduces problems with signal fades and dropped calls
while improving voice quality, service range and access. Wilson Cellular
amplifiers are network-compatible and enhance the cellular phone user's
satisfaction without compromising the operation of the cellular system.
Features:
- Passes TIA/EIA-98-E Transmit test for
evaluation CDMA Cellular Phones
- Power Control Logic ensures maximum output
power is within Cellular Standards
- Allows multiple phones to be used
simultaneously
- Allows cellular phone to operate properly
with all types of modulations including CDMA
- Maximum 3 Watts output power
- Designed for all cellular systems: AMPS,
CDMA, EDGE, GPRS, GSM and TDMA (not compatible with Nextel/iDEN)
- Automatic Gain Control
- Overload Protection Circuit - Protects cell
system from overload
- Automatic Reset - if overload occurs
- FCC Type Accepted
|
Application Note: Mobile cell phone repeaters are great for use in urban areas where you are experiencing dropped calls and poor connections. For usage in rural areas where signal is worse, a direct connect (inline) cell phone amplifier will perform much better. |
What are the benefits of
Wilson Cellular Wireless Mobile Amplifiers?
The Wilson Cellular Wireless Amplifiers allow
one or more users to benefit from an outside antenna and amplifier without a
physical connection to the cell phone. This eliminates the need for an external
antenna connection on the cell phone.
Installation Options:
- Option A: The inside antenna
(interior low profile antenna) should be mounted 1 foot or less from where the
phone is to be used. The best place to mount the inside antenna is shoulder
height on the side of the drivers seat. The closer the inside antenna is
placed to the phone, the better the performance. Do not mount the interior
antenna within 4" of metal.
- Option B: For convenience, the small
mini antenna (359914) can be directly attached to the phone and will perform
similar to an 811201 - Dual
Band Direct Connect Amplifier. The mini antenna must be connected
directly to the back of the phone using the included velcro. It must be
located as close to the phone's antenna as possible. The mini antenna will
not work when away from the phone as the interior low profile antenna will.
Connect the mini antenna (359914) to the amplifier using the included 6'
extension cable. NOTE: You can only use the included mini antenna
(359914) - you absolutely must not directly connect the amplifier to the
phone using any other adapter. Doing so will damage your phone.
- May also be used in conjunction with the
Wilson Cellular Cell
Phone Cradle Plus (the cradle would be used as the interior antenna)
Wireless Cell Phone Amplifier
vs Direct Connection Amplifier?
The Wilson Cellular Wireless Amplifiers and
Direct Connection Cell Phone Amplifiers
perform comparably in urban situations. Both amplifiers transmit up to 3 Watts of power to the cell
site and receive a signal as weak as -110dBm. For rural applications, the direct connect (inline) cell phone amplifier
will perform better and is recommended.
Does the Wilson Cellular
Wireless Mobile Amplifier affect a carrier's cell site?
Wilson Cellular's Wireless Mobile Amplifiers
have Smart Technology that automatically adjusts the power based upon the cell
site's requirements. This patent pending technology ensures that the power to
the cell site is within the carrier's specifications.
Includes:
- Interior low profile antenna
- Cigarette lighter power plug
- 6' Extension cable
- Mini 'antenna' (359914)
- Magnetic mount exterior antenna (301103)
Notes:
- The 801201 Mobile Cell Phone Repeater uses different power
supplies than the previous amplifiers. You can not use the older power
supplies 859903, 859904 or 859905.
Compatibility:
- Compatible with all 800MHz Cellular
and 1900MHz PCS providers (CDMA, TDMA, GSM, Analog). For example, Verizon,
Cingular, Alltel, US Cellular, Midwest Wireless, Cellular One, Western
Wireless, Sprint PCS, T-Mobile, Qwest and many more
- Not compatible with
iDEN (Nextel, Southern LINC, Mike)
801201 Mobile Cell Phone Repeater Catalog Page (PDF)
801201 Mobile Cell Phone Repeater Flyer / Amplifier Comparison (PDF)
801201 Mobile Cell Phone Repeater Installation Guide (PDF)
|
Specifications |
| Part Number |
|
801212 |
| Frequency |
|
824-894MHz,
1850-1990MHz |
| Gain (up/down) |
|
40dB /
45dB |
| Max Output Power |
|
3 Watts (Cell Site Controlled) |
| Max RF (downlink) |
|
+10dBm |
| Noise Figure (down) |
|
3.5 dB Nominal |
| Flatness |
|
±3 dB / ±4 dB |
| Isolation |
|
> 90dB |
| Power Consumption |
|
6V, 3 A max (subject to Uplink
Power) |
| Connectors |
|
FME Male, 50 Ohms |
| Dimensions |
|
4.5
* 3.5 * 1.25 (inch) |
| Weight |
|
1.5 lbs |
|
Product Reviews
801212 - Wilson Cellular 40dB In-Vehicle Wireless Dual-Band 800MHz/1900MHz Cellular/PCS Bi-Directional Amplifier Kit (Includes Magnetic Mount Antenna)
|
|